XUV835M CAB UTILITY VEHICLE

Crossover Utility Vehicle

Three person cockpit
Power steering for maneuverability
Over 16 gallons (57 L) of enclosed storage
Factory-installed cab

Apply For Financing

View Product Brochure

Share Facebook Twitter google_plus Email

Features

Roomy and quiet operator station

Heating, ventilation, and air conditioning (HVAC) dash shown

Operator station

Whether it is a completely open operator station or a factory installed cab, the interior has been redesigned with comfort and ergonomics in mind.

Gear shift control and differential shifter to the dash

HVAC dash shown (M trim)

Tilt steering


Tilt steering	Tilt steering (up position)	Tilt steering (down position)

Bench seat with diver adjustment

Bench seat adjustment

Three-wide seating

Seating

Enhanced cab comfort

Cab

M cab door

R cab door

Functioning door windows – roll up and down

Side windows and front window

Venting position

Fully opening front window with vent position

Headliner shown on an M-trim open station (with optional windshield, wipers, rear panel, and side mirrors installed)

Available interior roof headliner factory installed on M-trim cab units and M-trim heating, ventilation, and air conditioning (HVAC) cab units

Door sealing

Automotive-style sealing

Styled roof (R roof shown)

Styled roof with channels designed-in to move water to the outside edges

Front roof light

Rear roof light

Molded-in pockets for front and rear light mounting
- Keeps lights below the roof line for protection

Inner door handle

Outer door handle

Easy-opening door handles and mechanisms

M-trim HVAC controls

HVAC – if equipped

Powerful gas engine delivers superb starting, idling, and throttle response

812-cm3 (49.6- cu in.) gasoline engine

The machine is powered by an 812-cm³ (49.6-cu in.), 3-cylinder, dual overhead cams, liquid-cooled, four-cycle gasoline engine. It produces 6.5 kgm (47 lb-ft) of torque at 3200 rpm. The advanced electronic controls and fuel-injection system deliver superb starting, idling, and throttle response during operation.

The engine offers the following performance and reliability features:

40.3 kW (54 hp*) at 6000 rpm
72-km/h (45-mph) top speed
Electronic fuel injection for superb performance, altitude adjustment, and cold-weather starting (tested to -28.9°C [-20°F])
Electronic ignition is continuously variable for optimum engine power and provides fast, reliable starts
Exclusive electronic ground-speed governor and throttle body
Auto-compensates by providing more power when going up a hill or through difficult terrain
Eliminates top-speed degradation from belt wear
Overhead valve design provides greater efficiency and fuel economy
Full-pressure lubrication system
Spin-on oil filter with drain bracket and oil drain plug enable easy servicing
Dry, replaceable, single-element air cleaner with remote intake
See-through coolant recovery tank permits the operator to check the coolant level without having to remove the radiator cap
Open front grille allows air flow and proper ventilation to the radiator
Standard high-capacity alternator - 85 amps for maximum accessory capability

* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.

Dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics

XUV front suspension detail

To complement the robust frame, the XUV is equipped with four-wheel independent suspension.

A dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics.

The entire suspension system has been optimized to handle cargo without compromising ride quality or vehicle stability.

M-trim cab units (factory installed) and R-trim units have heavy-duty front and rear shocks installed from the factory.

A higher spring rate and higher preload force versus standard springs prevent the vehicle from sagging with a heavy payload.
These heavy-duty shocks help with the heavier weight of the cab and when attachments are installed, like blades.

Dual A-arm independent front suspension features include:

200.7 mm (7.9 in.) of travel provides ample wheel travel to keep all four wheels on the ground for superior traction, excellent ride quality, and vehicle control
Heavy-duty nodular cast-iron knuckles support the constant-velocity (CV) shaft and wheel
Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
CV shaft protection from sticks that may puncture the rubber boot
Coil-over shocks absorb the most demanding terrain

XUV rear suspension detail

Dual A-arm independent rear suspension features include:

Unequal length and dual A-arm construction for superior wheel control and travel
231.14 mm (9.1 in.) of total travel provides ample wheel travel to keep all four wheels on the ground for superior traction, excellent ride quality, and vehicle control
Coil-over shocks absorb the most demanding terrain
A-arms made from square/rectangular tubing reduce weight while remaining rigid
Heavy-duty nodular cast-iron uprights support wheel loads with a double row of ball bearings
CV driveshaft protection from sticks that may puncture the rubber boot
Rear sway bar for lateral stability

Superior terrain capability

The Gator™ XUV Crossover Series Utility Vehicle has a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously-variable clutch system to the transaxle.

Key elements of the drive system include:

Variable-speed drive

The variable-speed drive consists of two clutches and a drive belt:

Drive clutch is attached to the engine.
Driven clutch is attached to the transaxle.

Features include:

The engine braking system utilizes a tight belt for operation, requiring an idler sleeve on the primary clutch for neutral. The secondary clutch is a build-on-shaft design that utilizes a cam to tune the acceleration and deceleration of the vehicle. The clutch will stay engaged, providing deceleration until approximately 5 km/h (3 mph).
The continuously variable transmission (CVT) air intake draws in 50 percent more air versus previous designs to reduce heat and the amount of water ingestion into the CVT system. The system will reduce belt slippage and improve durability.
A low- and high-speed forward gear offering:
- Low range is 0 km/h to 47 km/h (0 mph to 29 mph), XUV835
- Low range is 0 km/h to 24 km/h (0 mph to 15 mph), XUV865
- High range is 0 km/h to 72 km/h (0 mph to 45 mph), XUV835
- High range is 0 km/h to 51 km/h (0 mph to 32 mph), XUV865
Ability to creep along slowly to maneuver in tight spaces
Standard full-clutch enclosure with high speed fan provides longer belt and clutch life
High-ratio clutches with three cam weights for maximum belt-clamp load in high torque conditions

NOTE: Delivery and torque to the ground depends on tire size, which is a function of nominal size and pressure.

How the variable-speed drive works:

As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.

Transaxle, mechanical front-wheel drive (MFWD), and constant velocity (CV) shafts

Side view of CVT intake and clutch enclosure

Differential lock lever and MFWD switch

Rear view of transaxle and CV shafts

CV boot protection

Operator interface features:

On-demand true four-wheel drive (4WD) system with an auto-locking front differential and dash-mounted electronic rocker switch is best in class. When the rocker switch is in the on 4WD position, the front differential will automatically lock for extra traction when needed, but when the rocker switch is in the off two-wheel drive (2WD) position, the vehicle will remain in 2WD.

Provides exceptional traction in challenging conditions
Maintains turf-friendly operation in 2WD mode
Illuminated for visibility in low-light condition

Transaxle features:

Two-speed, fully-enclosed oil bath transaxle allows for superior pulling ability
Cast-aluminum design is the most robust in the industry
Helical forward and reverse gears are used for quiet operation
Rear traction assist (differential lock) is built in and can be engaged on demand
- Allows locking the rear drive wheels together
- Provides increased traction in tough spots

NOTE: Differential design reduces scuffing of the turf during turns because it allows the inside wheels to turn slower than the outside wheels.

Neutral start safety interlock for engine ignition system
Large, sealed bearings are located inside the housing for better protection and durability
Contains gear case for transferring power to the MFWD
Splined shaft interfaces for maximum torque transfer and durability
All drive gears machined from highest grade gear steel
Protected by a skid plate

MFWD features:

Electronic design is auto-locking for ease of use
- Performs like a locking differential when engaged, but like an open differential when cornering
- Offers positive engagement of both front wheels in forward and reverse as a differential package
- Automatic engagement on the fly—no shift linkages required
- Protected by a skid plate and frame

Drive shaft features:

Rear CV shaft diameter measures 27 mm (1.1 in.) and is designed for peak engine and braking torque
Front CV shaft diameter measures 23 mm (0.91 in.) and is designed for peak engine torque
Propshaft is designed for peak engine torque
All CV shaft and propshaft joints are maintenance free and protected by exclusive thermoplastic elastomer (TPE) boots for durability

Extra-durable deluxe cargo box ensures hard-working performance and longevity

Deluxe cargo box with optional light protectors

Top view of cargo box

The deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust and dents and reduces noise.

Deluxe cargo box tailgate

Tailgate handle

Tailgate open

Tailgate lowered to 150 degrees

The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate has been improved, features truck-like performance, and can be operated with one hand.

The standard-installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.

Deluxe cargo box tilt

Integrated handle for manual cargo box tilt

The deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist.

A prop rod is provided to hold the box in the upright position for operator convenience, as well as limit box pivot travel.

Integrated tie-down points

Integrated tie-down point in cargo-box bed

Additional tie-down points (TH 6X4 shown)

The deluxe cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:

Four corners inside the cargo box bed
Four points on the load guard directly behind the operator station (A)
Tie-down bars on either side of the cargo box (B)
Six points on the underside of the cargo box frame (circled)

Converting deluxe cargo box to a flatbed

XUV835 Cab shown

XUV835M Cab shown

Optional accessories for the deluxe cargo box:

See attachment Sales Manual information

Specifications

Length	1143 mm (45 in.)
Width	1320 mm (52 in.)
Depth	304 mm (12 in.)
Volume	0.46 m³ (16.4 cu ft)
Weight capacity	454 kg (1000 lb)
Dump angle	47 degrees

CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.

Attachment-ready electrical system

On M- and R-trim vehicles, adding attachments and accessories is made easier by the inclusion of some main wiring harnesses that facilitate efficient hook-up.

Roof harness electrical port

Main vehicle harness – winch connection

Cargo box lift

Backup alarm

Brake / Tail / Reverse lights

Speed limiter kit

Base radio

Heater

4500 lb winch

Premium radio (base radio kit needed)

LED lights - front OPS

Windshield wiper

Windshield washer

LED lights - brushguard

LED headlights

Turn signals

Horn

Beacon light

LED lights - rear OPS

Sprayers

Spreaders

AMS integration kit

a,c

a,c,d

a,b

a,c,e

a,f

a,c,e,f

M open

c,d

c,e

c,e,f

M cab

e,f

	= connections in base harness
a	E-spec Attachment Harness
b	Front Attachments Harness
c	Roof attachment harness
d	Front cab harness
e	Rear cab harness
f	Dash port harness
*	If blank, the base chassis harness has the connector for the attachment

Equipped with power steering

This Gator™ XUV Crossover Utility Vehicle is equipped with power steering and a dual A-arm front suspension. These automotive-type systems exhibit excellent handling characteristics, as well as responsive steering and low steering effort:

Steel ball-bearings secure the steering shaft and deliver smooth, responsive operation
Completely sealed rack and pinion for long life
Low steering ratio (lock-to-lock) provides more responsive steering and less operator input
Shaft U-joints are phased for a smooth, uninterrupted motion of the steering wheel
Tilt steering wheel with XXXX in of travel

Electric power-assist steering system

Electric power-assist steering (EPAS) system has advanced features:

Anti-kickback feature reduces the amount of steering unwinding when traversing difficult terrain.
The system is speed-sensing and adjusts steering effort as the speed of the vehicle changes.
- As speed increases, there is less steering assist for improved road feel.
- As speed decreases, steering assist increases to give lower steering efforts for improved maneuverability.
A warning/functional light on the instrument panel provides self-diagnostics and a warning light in the situation of no assist.
Torque sensor measures steering wheel input so the on-board computer can provide the appropriate output for various driving situations.

With the EPAS system, the operator maintains a direct mechanical linkage from the steering wheel to the front wheels. The power steering system interfaces mechanically with the steering system by being inserted between the steering wheel and the rack-and-pinion assembly.

A differential torque sensor is integrated into the power steering assembly. The circuit board assembly is also integral with the power steering assembly.

Power steering does not reduce turning radius but significantly reduces steering effort by approximately 85 percent compared to models without power steering.

EPAS interface diagram

The numbered descriptions refer to the EPAS interface diagram shown above:

Torque sensor
Electronic control unit (ECU)
Fail-safe relay
Current/thermal control circuit
Reduction gears
DC motor
Rack and pinion
Function/warning light
Key power and ground
Vehicle speed sensor
Instrument cluster
Relay module

M trim details

The M trim adds electrical power-assist steering (EPAS) and brings in the main wiring harness for easier attachment hook-up. Cabs are available in this trim level. Heating, ventilation, and air conditioning (HVAC) is also an option within the M-trim level.

Build-to-order options

Roof standard on all units – can order less roof on open station units
Available factory-installed winch on M- and R-trim units
Available factory-installed front glass windshield on M Trim open station units
Available factory-installed rear glass panel on M Trim open station units
Available factory-installed brush guard
Available factory-installed brush guard extensions
Available factory-installed rear cargo box fender guards (rear bumper required, also factory installed)

Specifications

Compare the specifications of up to 4 models

Key Specs	xuv835m-cab-utility-vehicle Current Model
Engine power	43* kW 54* hp
Maximum traveling speed	0-45+ hi forward, 0-29 lo forward, 0-33 reverse mph 0-72 hi forward, 0-47 lo forward, 0-53 reverse km/h
Cargo box dimensions	1143 x 304.8 x 1320 mm 45 x 12 x 52 in.
Cargo box capacity (weight)	454 kg 1000 lb
Towing capacity	907 kg 2000 lb
Front suspension	Fully independent dual A-Arm with adjustable coils; 7.9 inches (200.7 mm) of travel
Rear suspension	Fully independent dual A-Arm with adjustable coils and sway bar; 9.1 inches (231.14 mm) of travel
Final drive	Two speed, oil bath
Four wheel drive	On-demand true four-wheel drive system
Fuel capacity	42.4 L 11.2 U.S. gal.
Engine
Type	4-cycle gas, Electronic Fuel Injection (EFI)
Displacement	812 cc
Power	43* kW 54* hp
Cooling system	Liquid
Drivetrain
Transmission	Continuously Variable Transmission (CVT) with clutch enclosure
Final drive	Two speed, oil bath
Four wheel drive	On-demand true four-wheel drive system
Traction assist	Positive locking, mechanically actuated (hand-operated)
Descent control	Yes
Maximum traveling speed	0-45+ hi forward, 0-29 lo forward, 0-33 reverse mph 0-72 hi forward, 0-47 lo forward, 0-53 reverse km/h
Suspension
Front	Fully independent dual A-Arm with adjustable coils; 7.9 inches (200.7 mm) of travel
Rear	Fully independent dual A-Arm with adjustable coils and sway bar; 9.1 inches (231.14 mm) of travel
Brakes
Type	Front/rear hydraulic disc with twin piston front calipers
Park brake	Driveline, internal wet multi-disc, foot operated (hand release)
Tires / Wheels
Front	25x9-12 Terrahawk AT, 27x9-R14 Maxxis Big Horn Radials (on Alloy Rims), or Maxxis Big Horn Radials (on Steel Rims)
Rear	25x11-12 Terrahawk AT, 27x11-R14 Maxxis Big Horn Radials (on Alloy Rims), or Maxxis Big Horn Radials (on Steel Rims)
Dimensions / Capacities
Wheelbase	2146 mm 84.5 in.
Dry weight	970 kg 2134 lb With Cab and HVAC: 1019 kg With Cab and HVAC: 2241 lb *Additional Attachments and Accessories will add weight
Length	3228 mm 127 in.
Width	1763 mm 69.4 in. With doors: 1763 mm With doors: 69.4 in.
Height	1987 mm 78.25 in. With roof: 1987 mm With roof: 78.25 in.
Tread centers	Front: 1341 mm Front: 52.8 in. Rear: 1259 mm Rear: 49.6 in.
Ground clearance	284 mm 11.2 in.
Fuel capacity	42.4 L 11.2 U.S. gal.
Cargo box dimensions	1143 x 304.8 x 1320 mm 45 x 12 x 52 in.
Cargo box capacity (weight)	454 kg 1000 lb
Payload capacity	680 kg 1500 lb
Towing capacity	907 kg 2000 lb
Hitch	Standard 2-in. receiver
Features
Color	Green/Yellow, Camouflage, Olive and Black
Power steering	No on E Trim; Yes on M and R Trim
Battery / Alternator / Power port	480 CCA 85 amp @ 6000 rpm, regulated, 1020 watts
Instrumentation	Digital Display (system diagnostic light, speed, rpm, 4WD indicator, fuel level, coolant temperature, hour meter, miles, park brake light)
Storage	4 Cup Holders (2 additional for cab units), in dash, Under Seat (56.69 L), Glovebox (3.85 L), Optional Under Hood - except for HVAC units or units with the dealer installed heater kit
Seating	Bench (Available Bucket Seats on E and M Trim)
Headlights	Halogen - Single Beam (LED Dual Beam on R Trim)

Accessories and Attachments

Ag Management Solutions

AMS Integration - BUC10634

StarFire™ 3000 Receiver installed on XUV835R

GreenStar™ display installed on XUV835R with optional phone and tablet mounts

The AMS integration kit allows the operator to mount a StarFire Receiver and GreenStar display (both receiver and display sold separately) to the Gator™ Utility Vehicle.

Key features of the AMS integration kit:

Compatible with StarFire iTC, StarFire 3000, and StarFire 6000 Receivers
Compatible with GreenStar 2 1800, GreenStar 2 2600, GreenStar 3 2630, and John Deere 4640 Universal Display
Ability to mount receiver to the poly roof or on the occupant protective structure (OPS) alone

NOTE: Additional components are required to support the John Deere 4640 Universal Display include:

AL212683 (1)
21M7577 (2)

Common applications:

Boundary mapping
Flagging field obstacles
Soil sampling

Compatibility:

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements:

XUV835/865	Attachment harness required (see below)
E	1, 3, 5, 6
M (open station)	3, 5, 6
M (cab, factory installed)	5, 6
R	6

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

Code	Attachment	Description
	BUC10634	AMS integration kit

Backup Alarm

Backup Alarm - BM24726

The back-up alarm kit alerts pedestrians when the Gator™ is operating in reverse:

Includes alarm, mounting brackets, wire harness, and reverse switch (if not already installed)
Conforms to SAE J994 performance specifications for a Type D alarm and is 89 dBA per the SAE specification (measured at 4 ft)

Bumper

Rear Bumper - BM22767

Rear bumper kit (TH 6X4 shown)

The rear bumper offers stylish, heavy-duty rear protection to the vehicle.

Compatible with:

Model year 2011 and later Gator™ XUV 625i, XUV 825, and XUV 855 Utility Vehicles
Model year 2010 and later Gator TX, TX Turf, TH 6X4 Gas, TH 6X4 Diesel, and TE Utility Vehicles
Model year 2018 and later Gator XUV835 and XUV865 Utility Vehicles

Cab Operator's Station

Cell Phone Mount Kit - BRE10015

Cell phones, global positioning system (GPS), and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator station.

RAM X-Grip holder

For proper machine operation, it is critical that accessory devices and tools be located and mounted where they are accessible but do not interfere with visibility and controls. The new RAM® mount kit has been specially developed to meet this need in John Deere tractors and now utility vehicles.

Simply remove the large wing nut from the assembly, insert the stud into any open hole in the occupant protective structure (OPS), and tighten down the jam nut.

Key benefits:

Patented RAM X-Grip™ holder fits most cell phones and similar devices including iPod®, iPad®, iPhone®, BlackBerry®, Samsung Galaxy® and others.
Mounts to the holes in the OPS
Ball joints allow for variable positioning
Holds firm even in rugged terrain
The holder is compatible with many other RAM® products with their B size or 25.4-mm (1-in.) ball accessories

RAM X-Grip

The RAM X-Grip has a clean and clever four-leg design that sports great holding power without hiding the phone behind foam pads and plastic.

Features:

Rustproof
High-strength composite and stainless-steel construction
Spring-loaded holder expands and contracts for custom fit
- Minimum width: 1.875 in. (47 mm)
- Maximum width: 3.25 in. (82 mm)
- Depth: 0.875 in. (22 mm)
Rubber-coated tips will hold device firm and stable
Easy access grip knobs for quick release of your device

Warranty:

90 days, limited.

RAM and RAM X-Grip are trademarks of National Products Inc. iPad, iPod, and iPhone are trademarks of Apple, Inc. BlackBerry is a trademark of Research In Motion Limited (RIM). Samsung Galaxy is a trademark of Samsung Electronics Co.

Cargo Box

19 L (5 gal) Pail Holder - BM23849

Cargo box pail holder

The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.

Cargo Bed Extender - BM25700

Cargo bed extender

The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.

Cargo Box Bed Mat - BM22772

Deluxe cargo box bed mat

The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.

Cargo Box Divider - BM22769

Cargo box divider located at rear of cargo bed

Cargo box divider located at front of cargo bed

Speedrail lock in the unlocked postion

Speedrail lock in the locked postion

The Gator™ XUV Series can be equipped with an optional divider for the deluxe cargo box. The dividers can be positioned at the front or rear of the cargo box bed. To change positions of the dividers, simply release the speedrail locks by hand and slide into new position, then close the locks to secure the dividers.

Cargo Box Side Extension Kit - BM24901

Cargo box side extension kit

The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.

Product features include:

Four-sided structure that increases cargo box side height to 533 mm (21 in.) and volume to 0.74 m³ (26 cu ft)
Mounted on the sides and front with hardware, while the tailgate can be attached or removed without tools
- Tailgate pivots at the top (similar to a dump truck) for ease of dumping loose material
Laser-cut, heavy-gauge, powdered-coated steel provides excellent durability
Compatible with all model year 2011 to current Gator XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and M-Gator A2 Utility Vehicles
Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles.
Compatible with Gator cabs and bedliner

NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.

Cargo box side extensions cover - BUC10156

Cargo box side extension kit (required, sold separately)

Cargo box side extensions cover

Tailgate down, side extension flipped up

Key features

The cover closes off the top of the side extensions, ideal for hauling hunting dogs and small animals
Easily attaches to the side extension kit (required, sold separately)
Dimensions: 132-cm (52-in.) wide x 65-cm (25.5-in.) tall x 114-cm (45-in.) deep

Compatibility

Model year 2011 to current XUV625i, XUV825i/E/M, XUV825i/E/M S4, XUV855D/E/M, and XUV855D/E/M S4 Utility Vehicles
Model year 2010 to current TX, TX Turf, TH, and TE Utility Vehicles
Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Model year 2018 to current HPX615 and HPX815 Utility Vehicles

Label kit for toolboxes (Green & Yellow) - BM26220

Rear Fender Flare - BUC10567

Rear fender flare kit on XUV865

Rear fender flare kit

A – Fender flare

B – Fender

The rear fender flare kit minimizes debris from reaching the operator station.

Product features include:

Two pliable fender flares (one for each side)
Hardware for mounting on the sides
Compatible with all model year 2011 to current Gator™ XUV825, XUV825 S4, XUV855, XUV855 S4, XUV835, and XUV865 Utility Vehicles
Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles

Side Tool Rack - BM22775

Tool rack

Tool rack with tools

The side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box. The holders are adjustable, allowing the users to carry a wide array of items in the racks.

Tool rack holder detail

Adjusting the tool rack holder

Spare Tire Carrier - BM25577

Spare tire carrier

Easily mount a spare tire to the side of the cargo box with this convenient kit.

Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.

Sportsman Gear Bag - LP67754

Sportsman gear bag (closed)

Sportsman gear bag (open)

Quick-connect latches on cargo box

Key features

Holds two firearms up to 1.3 m (51 in.) in length
Firearm support blocks can be removed to transport a wide array of gear
Bag easily attaches and detaches to cargo box with quick-connect latches for easy storage in the off season
Convenient carry straps
Made from waterproof, mildew- and abrasion-resistant material to keep gear dry
Oversized, corrosion-resistant zippers for durability and ease of use
Rain flap covers the zipper to prevent water infiltration

Compatibility

Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
Model year 2010 to current TX, TX Turf, TH, and TE Utility Vehicles
Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone

Cargo Box Lift

Cargo Box Power lift - BM26414

Shown in full up position

The Gator™ XUV Series can be equipped with an optional power lift for the cargo box. This is one of the most important accessories for increasing work efficiency. It is an excellent complement to these highly capable utility vehicles.

Key features

Capable of lifting a maximum vehicle cargo box load of 454 kg (1000 lb)
Lifts box to 49 degrees from horizontal for ease of service and cargo box load removal
Quick horizontal-to-49-degree time
Can be installed in minutes using the vehicle's prewired connectors and mounting points
Compact design fits nicely around the transmission and linkages, providing full protection
Fully sealed and weatherproof design does not require maintenance and is built for maximum durability
Overload protection protects against misuse

Compatibility

Model year 2018 to current XUV825 and XUV855 Utility Vehicles
Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Cover

Deluxe Cargo Box Cover- Camo - LP19879

Deluxe cargo box cover (shown in black)

The deluxe cargo box cover easily installs without tools and keeps the cargo secure and protected from the elements. It is compatible with Gator Utility Vehicles equipped with the all-new deluxe cargo box.

Compatible with all model year 2011 - current Gator XUV 625i, XUV 825i, XUV 855D, TX, TX Turf, TH 6X4, TE, M-Gator™ A2, and M-Gator A3 Utility Vehicles.

Compatible with all model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles.

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Deluxe cargo box cover - Camo
Order number: LP19879

Vehicle storage cover - LP68148

Vehicle storage cover

Key features

All-season protection against sun damage, rain, dust, and tree sap
Reinforced corners for added durability
Fabric coated for maximum water resistance and repellency
Elastic shock cord in bottom hem for a quick, custom fit

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone

Drawbar

48mm (1 7/8-in.) hitch ball for ball-type hitch. Ball Mount sold separately. - PM05101

48-mm (1-7/8-in.) hitch ball

The 48-mm (1-7/8-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

The ball hitch is available through Service Parts.

51mm (2-in.) hitch ball for ball-type hitch. Order ball mount separately. - PM05201

48-mm (1-7/8-in.) ball hitch shown

The 51-mm (2-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

The ball hitch is available through Service Parts.

Drawbar

Drawbar/ ball mount for 51mm (2 in.) receiver hitch. Hitch Ball sold separately. - BM22290

Drawbar kit for receiver hitch

Description:

Kit includes a 51-mm (2-in.) drawbar, 10-mm (0.39-in.) pin, and hair cotter pin
Steel construction has a 25-mm (1-in.) ball hole size
Can be mounted in the standard rear receiver hitch or the optional front receiver hitch
Compatible with all Gator model year 2011-current XUV560, XUV560 S4, XUV590, XUV590 S4, XUV 625i, XUV 825, XUV 855, RSX860, and M-Gator™ A2 Utility Vehicles
Compatible with HPX 615 and 815 Utility Vehicles
Compatible with XUV 620i and XUV 850D Utility Vehicles

NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.

Floor Mat

Floor Mats (2) - BM26462

Left floor mat

Right floor mat

Key features

Kit includes left and right floor mats
Made from 8-mm (5/16-in.) thick textured rubber
Tool-less install and easy removal for cleaning
Helps further dampen operator station noise

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Front Rack

Front Hood Rack - BM26109

Hood rack

Hood rack (hinged forward)

Key features

124.5-cm (49-in.) long x 36-cm (14.25-in.) wide x 11-cm (4.25-in.) deep
Welded steel tubing
Design allows for convenient tie-down points to secure load
45-kg (100-lb) capacity

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Requires brush guard to be installed

MOLLE Device Pouch - Black - LP66151

MOLLE device pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Velcro flap closure
Padded to protect device and contents
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 6-in. (152.4-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Built-in drain hole
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Device Pouch - Camo - LP66150

MOLLE device pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Velcro flap closure
Padded to protect device and contents
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 6-in. (152.4-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Built-in drain hole
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Fire Extinguisher Pouch - Black - LP66153

MOLLE fire extinguisher pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Military-grade rapid extraction clips
Fits standard round 2.5-lb (1.1-kg) fire extinguishers
Padded to protect contents
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 6–in. (152.4-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Fire Extinguisher Pouch - Camo - LP66152

MOLLE fire extinguisher pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Military-grade rapid extraction clips
Fits standard round 2.5-lb (1.1-kg) fire extinguishers
Padded to protect contents
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 6–in. (152.7-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Large Pouch - Black - LP66149

MOLLE large storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Dual military-grade zippers and pulls
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 5–in. (127-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Built-in drain hole
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Large Pouch - Camo - LP66148

MOLLE large storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Dual military-grade zippers and pulls
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 5–in. (127-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Built-in drain hole
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Small Pouch - Black - LP66147

MOLLE small storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Military-grade zippers and pulls
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 5–in. (127-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE Small Pouch - Camo - LP66146

MOLLE small storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

Military-grade zippers and pulls
Constructed with military-grade Cordura™ fabrics
Utilizes the MOLLE attachment system
Pair of 5–in. (127-mm) MOLLE sticks included
Available in black or REALTREE HARDWOODS HD™ pattern
Inner liner made of high-density coated pack-cloth nylon fabric
Limited 1-year warranty
Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

Guards

Brushguard - BUC10679

Brush guard

Quick pull pins

Brush guard hinged forward

Auxiliary lights mounted on brush guard (sold separately)

Key features

Provides a modern and aggressive appearance
Heavy-duty, 44.45-mm (1.75-in.) diameter, steel tube construction
Welded steel brush guard provides protection for the front grille, lights, and hood
Easy-to-use quick pull pins allow the brush guard to be hinged forward to gain access under the hood
Includes mounts for auxiliary light-emitting diode (LED) lights (sold separately)

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Brushguard extensions - BUC10141

Brush guard extensions

Brush guard with extensions hinged forward

Brush guard with extensions

Key features

Enhances the aggressive appearance of the vehicle
Easily attaches to the brush guard (required – sold separately)
Provides additional protection to the side hood and fender area without adding additional overall width to the vehicle
Still allows full entry under the hood when brush guard is hinged forward

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

CV Guards - front & rear - BM25863

Front CV guards

Rear CV guards

Key features

Kit contains both front and rear CV guards
Additional added protection for the A-arms and CV joints
High-strength, formed steel guards handle impacts while maintaining a low, unsprung mass to provide exceptional ride quality
Easily bolts to the A-arms
Drainage holes on the bottom of the guards prevent buildup of dirt, grass, and other loose materials

Compatibility

Model year 2018 XUV835 and XUV865 Utility Vehicles

Cargo Box Fender Guard - BM26129

Cargo box fender guards

Key features

Connects with rear bumper (required – sold separately)
Provides enhanced styling in addition to heavy-duty protection to the side of the cargo box

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Front Fender Guard - BUC10247

Front fender guards - shown with brush guard (required) and brush guard extensions (optional)

Key features

Easily attaches to the brush guard (required – sold separately)
Provides protection to the front fender area
- NOTE: With fender guards installed, the overall width of the vehicle increases to 1.75 m (69 in.).

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Rear panel glass protector - BUC10245

Rear-panel glass protector

Key features

Provides protection to the cab rear-panel glass
- NOTE: Never carry loads in the cargo box over the load guard.
Perforated, black metal screen easily attaches to the cab rear panel (required – sold separately)

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Harnesses

CAN Bridge Control Kit - BUC10316

Front Attachment Harness - BM26265

Front attachment harness

Key features

The front attachment harness includes connections for the following kits:

Light-emitting diode (LED) headlights
Turn signals
Horn
Brush-guard-mounted auxiliary lights

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Front Attachment Harness (dash port) - BM26268

Dash port harness connection

Dash port harness – lower connectors

Key features

The front attachment harness (dash port) includes connections for the following kits:

Rear sprayer
Rear spreader
Blades
GreenStar™ Display as part of the Ag Management Solutions (AMS) integration kit

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Hydraulic Blade and Winch Harness Kit - BUC10604

Hydraulic blade and rear winch harness

Key features:

The hydraulic blade and winch harness includes connections for the following kits:

Hydraulic blade
Winch

Compatibility:

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Rear Cab Attachment Harness - BM26739

Rear cab attachment harness

Key features

The rear cab attachment harness includes connections for the following kits:

Rear auxiliary lights
Beacon light
Ag Management Solutions (AMS) receiver harness

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Heater

Heater - BM26642

Heater vent locations (heater shown on export vehicle)

Heater switch

Key features

Four 5.1-cm (2-in.) adjustable vents, located for defrost and floor heat
High and low fan speeds

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Horn

Horn Kit - BM26391

Horn

Horn switch

Key features

Frequency: 410 Hz
Sound pressure level: 100+ dB(A)
Water-sealed type

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements

XUV835/865	Attachment harness required (see below)
E	1, 2
M (open station)	2
M (cab, factory installed)	2
R	---

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

Lighting

Beacon Light - BM26185

Beacon light in up position

Beacon light in down position

Backlit beacon light switch

Key features

76-mm (3-in.) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
Especially useful for working around properties and job sites
Acrylic amber lens resists scratching and scuffing
Impact-resistant nylon housing
Society of Automotive Engineers (SAE) J845 (Class 3)-compliant
UL® recognized
Flash rate: 60 +/- 10 fpm
Stands 21.3-cm (8.4-in.) tall from roof/occupant protective structure (OPS)
Folds down out the way when not in use

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements

XUV835/865	Attachment harness required (see below)
E	1, 3, 5
M (open station)	3, 5
M (cab, factory installed)	5
R	---

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

UL is a trademark of UL LLC.

LED Driving Lights (2 Lights) - BM26215

Front cab mounted

Rear cab mounted

Brush guard mounted

Key features

The LED driving lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
Beam pattern: driving (focused, intense beam of light good for illuminating a stretch of road directly in front of the vehicle)

Driving beam pattern – mounted on brush guard

Driving beam pattern – mounted on OPS/roof

Lamp sealing: IP69K
Light output (per light): 1150 lumens
LED color temperature: 5000 K
Amp draw (per light): 1.4 amps
6 LEDs per light
Aluminum housing

Compatibility

Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
HPX Utility Vehicles

LED Headlights (2) - BM26589

LED headlights

Three-position backlit light switch

Key features

Upgrade from halogen headlights
High/low beam
Raw lumen output (per light): 1,075 (high beam), 430 (low beam)
Effective lumen output (per light): 720 (high beam), 240 (low beam)
Nominal LED color temperature: 5000 K
Current draw: 1.14 amps (high beam), 0.41 amps (low beam)

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements

XUV835/865	Attachment harness required (see below)
E	1, 2
M (open station)	2
M (cab, factory installed)	2

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

LED Work Lights (2 Lights) - BM26216

Front cab mounted

Rear cab mounted

Brush guard mounted

Key features

The LED work lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
Beam pattern: flood (spread of light over a wider, shorter distance)

Flood beam pattern – mounted on OPS/roof

Lamp sealing: IP69K
Light output (per light): 1200 lumens
LED color temperature: 5000 K
Amp draw (per light): 1.4 amps
6 LEDs per light
Aluminum housing

Compatibility

Model Year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
Model Year 2018 to current XUV835 and XUV865 Utility Vehicles
Model Year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
HPX Utility Vehicles

Tail Light Protectors - BM22773

Brake and taillight protector

The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.

Mirrors

Rear View Mirror - BM26477

Rearview mirror

Key features

Convex mirror reflects a wide-angle image to help the operator see behind the vehicle
Connected to ball stud for easy adjustment

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Side Mirrors (open station & cab doors) - BUC10310

Side mirrors – open station

Side mirrors – cab door

Key features

Kit allows mirrors to be installed on either an open-station or cab vehicle
Mirrors can be easily adjusted based on operator preference

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Operator''s Station

Accessory mount bracket - BUC10176

Accessory mounting bracket (shown with tablet and cell phone mount)

Key features

Allows the cell phone and tablet mount to be installed in the upper dash location
Required for cell phone mount if mounted in the lower dash location

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Sun Visors (2) - BM26478

Visors (shown on R-spec)

Key features

Shades occupants from the glare of sunlight
Hinged design
Tan color
Kit includes left and right visor. Rearview mirror kit required for installation.

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Tablet mount - BUC10175

Tablet mount – upper mount location (shown with cell phone mount – sold separately)

Tablet mount – lower mount location (shown with cell phone mount – sold separately)

Key features

Keeps tablet at the operator’s fingertips for doing jobs such as soil sampling
Utilizes a RAM® mount to easily move tablet to desired location

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

RAM is a trademark of National Products, Inc.

Radio

Base radio kit - BUC10615

Lower left speaker

Lower right speaker

Head unit (sold separately) installed

Key features

Kit includes:
- Wiring harness
- AM/FM antenna
- Head unit mounting bracket
- Two 13.3-cm (5.25-in.) speakers
Jensen® speakers
- Waterproof
- 45-W root mean square (RMS) power each
- 135-W peak power each
The head unit is sold separately through Parts. The operator must choose one of the following three head units to complete the stereo:
- SWJHD1130 – heavy-duty stereo with AM/FM, weatherband, and auxiliary input
- SWJHD1635BT – heavy-duty stereo with AM/FM, weatherband, auxiliary input, SiriusXM® satellite radio, and Bluetooth® wireless technology
- SWJHD36AMIC – heavy-duty stereo with AM/FM, weatherband, compact disc (CD), auxiliary input, SiriusXM satellite radio, USB 2.0, and Bluetooth wireless technology

NOTE: Must order head unit through Parts.

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Jensen is a trademark of Electronics Trademark Holding Company LLC. SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc.

Premium speaker kit - BUC10619

Upper speakers

Subwoofer

Bluetooth® microphone

SiriusXM® Radio antenna/tuner

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Requires base radio kit

SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. Jensen is a trademark of Electronics Trademark Holding Company LLC.

Key features

Kit includes:
- Wiring harnesses
- SiriusXM® radio antenna/tuner (XM ready head unit required – sold separately)
- Two 13.3-cm (5.25-in.) upper speakers
- Subwoofer
- Bluetooth® wireless microphone
Jensen® speakers
- Waterproof
- 45-W root mean square (RMS) power each
- 135-W peak power each
Jensen subwoofer
- Waterproof
- 20.3-cm (8-in.) amplified subwoofer
- Maximum power: 200 W
- Aluminum mesh grille
- Aluminum housing
The head unit is sold separately through Parts. The operator must choose one of the following two head units to complete the stereo:
- SWJHD1635BT – heavy-duty stereo with AM/FM, weatherband, auxiliary input, SiriusXM satellite radio, and Bluetooth technology
- SWJHD36AMIC – heavy-duty stereo with AM/FM, weatherband, compact disc (CD), auxiliary input, SiriusXM satellite radio, USB 2.0, and Bluetooth technology

NOTE: Must order head unit through Parts.

Roof

Roof Headliner - BUC10550

Roof headliner

Roof headliner installation

Key features

Enhances the appearance of the operator station with a molded, soft-touch, automotive-style roof headliner
Made from 3.175-mm (1/8-in.) thick sound-dampening material for improved occupant comfort
Easily attaches to the roof with cap screws and push darts

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Seat

Bench seat cover (black) - LP68162

Bench seat cover

Modular Lightweight Load-carrying Equipment (MOLLE) attachment location

Key features

Protection for the bench seat from wear and stains
Constructed with military-grade Cordura® fabrics
Quick and easy installation
MOLLE attachment locations (MOLLE attachments available through Order Zone)
Easy access to seatbelts

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone

Cordura is a trademark of INVISTA North America S.à.r.l.

Bench seat cover (camo) - LP68420

Bench seat cover (yellow) - LP68149

Bench seat cover

Key features

Protection for the bench seat from wear and stains
Elastic-hem cord closure for easy adjustment
Easy access to seatbelts

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone

Seat-Belt Comfort Strap (2) - BM26583

Comfort straps

Kit includes two comfort straps for the left and right seat belts.

Provides relief to the operator's and passenger's upper body when driving over rough terrain by allowing the seat belt to stretch when the seat belt locks
Moves the upper mounting point of the seat belt down 6 in. (152 mm)
Can be mounted to both the driver- and passenger-side upper mounting point of the three-point seat belt
Compatible with all model year 2017 - current Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, and RSX860i Utility Vehicles when equipped with standard Occupant Protective Structure (OPS)
Compatible only with standard Occupant Protective Structure (OPS), for deluxe cab frame, order BM22703

Speed Control

Speed Limiter - BM26262

Speed limiter

Key features

Mounts directly in the glove box
Limits speed to 42 km/h (26 mph) in the ON position
Vehicle has full acceleration and work capability between 0 and 72 km/h (0 and 45 mph) when the speed limiter is in the OFF position
Controlled with a key that can be removed in the ON or OFF position
Two keys per kit

Compatibility

Model year 2018 to current XUV835 Utility Vehicles

Sprayers

Sprayer Conversion Kit - LP68195

Storage

Gator Toolbox - LP19886

Gator toolbox shown on TH 6x4 with deluxe cargo box

Gator toolbox - open

Quality constructed from 16 gauge steel, this industrial tool box is durable enough to handle wear and tear even from the toughest contractors. This tool box keeps tools, equipment, and other valuables secure, clean, dry, and protected from outside elements - due to full weather seal locks and a rust-resistant, powder-coat paint application. Twin commercial-grade gas shocks automatically lift lid for effortless one-handed open/close. Comes complete with key locks to guard against theft.

Product attributes:

Two lids hinged at the middle allows access from both sides of the vehicle
Extra-wide lid opening allows easy access to tools and valuables
Key locks guard against theft (two keys provided)
Compatible with Gator TX, TH, TE, XUV 625i, XUV 825i/E/M, XUV 825i/E/M S4, XUV 855D/E/M, and XUV 855D/E/M S4, XUV835E/M/R, XUV865E/M/R Utility Vehicles equipped with the deluxe cargo box as shown in the picture above
Also compatible with Model Year 2018 and newer HPX615 and HPX815

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Gator tool box
Order number: LP19886

Label kit for toolboxes (Camo) - BM26219

Label kit for toolboxes (Olive & Black) - BM26218

Side Opening Toolbox - BM26160

Side-door opening toolbox

This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.

Side-door opening toolbox features:

125-L (33-gal.) sealed storage
Heavy-gauge sheet metal
D-rings for tie downs
Fully sealed lockable latch
Sealed door
Door can also be used as a work bench when down
Can be mounted on either side of the cargo box

	Side-door opening toolbox
Toolbox weight	29 kg (64 lb)
Toolbox capacity	34 kg (75 lb)
Toolbox dimensions	-Full box: 109.4-cm (43.1-in.) long X 35-cm (13.8–in.) wide X 32.5-cm (12.8–in.) tall -125-L (33-gal) total volume

The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.

The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:

BM26220 – green and yellow
BM26218 – olive and black
BM26219 – camo

This toolbox is compatible with the following Gator™ Utility Vehicle models:

TX
TX Turf
TE
TH
XUV625i
XUV825i/E/M
XUV825i/E/M S4
XUV855D/E/M
XUV855D/E/M S4
XUV835E/M/R
XUV865E/M/R
Model Year 2018 and newer HPX615 and HPX815

Tailgate w/ brake and tail lights for toolboxes - BUC10393

Tailgate with brake lights and taillights

This tailgate kit with brake lights and taillights is specifically designed for compatibility with the top and side-door toolboxes (BM26162 and BM26160).

The tailgate can be installed in minutes once the toolbox and tail lights are installed by bolting them to the tailgate bracket.

Optional label kits are designed to fit with this tailgate:

BM26220 – green and yellow
BM26218 – olive and black
BM26219 – camo

The tailgate is compatible with the following Gator™ utility vehicle models:

TX
TX Turf
TE
TH
XUV625i
XUV825i/E/M
XUV825i/E/M S4
XUV855D/E/M
XUV855D/E/M S4
XUV835E/M/R
XUV865E/M/R
Model Year 2018 - current HPX615 and HPX815

Top Opening Toolbox - BM26162

Top-door opening toolbox

This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.

Top door opening toolbox features:

125-L (33-gal.) sealed storage
Heavy-gauge sheet metal
D-rings for tie downs
Fully sealed lockable latch
Sealed door
Toolbox divider
Removable tool tray
Can be mounted on either side of the cargo box

	Top door opening toolbox
Toolbox weight	32.7 kg (72 lb)
Toolbox capacity	32.7 kg (75 lb)
Toolbox dimensions	-Tray: 27.4-cm (10.8-in.) long x 21.8-cm (8.6-in.) wide x 7.1-cm (2.8–in.) deep -Left-hand side compartment: 46.2-cm (18.2–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9–in.) tall -Right-hand side compartment: 62.7-cm (24.7–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9-in.) tall -125-L (33-gal.) total volume

The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.

The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:

BM26220 – green and yellow
BM26218 –olive and black
BM26219 – Camo

This toolbox is compatible with the following Gator™ Utility Vehicle models:

TX
TX Turf
TE
TH
XUV625i
XUV825i/E/M
XUV825i/E/M S4
XUV855D/E/M
XUV855D/E/M S4
XUV835E/M/R
XUV865E/M/R
Model year 2018 and newer HPX615 and HPX815

Underhood storage tub with removable tool tray - BUC10167

Underhood storage tub and tray installed in vehicle

Underhood storage tub with removable tool tray

Key features

Easily installs under the hood in models that do not have heating, ventilation, and air conditioning (HVAC) or the heater kit
Storage tub has a volume of 21 L (5.5 gal.)
- Rough dimensions: 88.1 cm x 20.3 cm x 38.2-cm deep (34.7 in. x 8 in. x 15-in. deep)
Removable drain plug
Removable tool tray
- Dimensions: 45.5 cm x 19.3 cm x 4.6-cm deep (18 in. x 7.6 in. x 2-in. deep)

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Only compatible on these vehicles that do not have HVAC or heater kit installed

Tracks

Camso Tracks (Gas) - LP65667

Tracks

Key features

Improves flotation and traction
All season capability – ideal for snow, mud, and marsh
Easily switch between tracks and wheels

Compatibility

Model year 2018 to current XUV835 Utility Vehicles

Ordering information

Available through Order Zone

Turn Signals

Front Turn Signal Light Kit - BUC10608

Front turn signals

Rear signal lights (taillight protectors not included)

Hazards switch (top)

Turn signal switch (right)

Key features

Kit includes:

Front/rear turn signals
Hazards
Backlit switches

NOTE: Not intended for use on public roadways.

Compatibility

Compatible with all model year 2011 to current Gator™ XUV825 and XUV825 S4 Utility Vehicles

Also requires turn signal light harness kit

Compatible with all model year 2011 to current Gator XUV625i, XUV855, and XUV855 S4 Utility Vehicles

Also requires turn signal light harness kit

Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements

XUV835/865	Attachment harness required (see below)
M (open station)	2
M (cab, factory installed)	2
R	---

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

Winch

WARN ProVantage 2041 kg (4500 lb) Winch - BM26251

2041.2-kg (4500-lb) winch (chassis mounted)

Plug-in remote

Key features

Impressive pulling capacity of 2041.2 kg (4500 lb)
Equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities
Includes a 3-m (10-ft), water-resistant, plug-in remote for safe distance operation that plugs directly into the glove box
15 m (50 ft) of 5.6-mm (7/32-in.) synthetic rope with hawse fairlead. Synthetic rope does not develop sharp burrs like steel rope and does not store as much potential energy when under load.
Ergonomic clutch handle
Limited lifetime, 3-year electrical (North America) warranty offered through WARN

Compatibility

Model year 2018 to current XUV835 and XUV865 Utility Vehicles
M-spec and R-spec vehicles come from the factory winch ready, and no additional attachment harnesses are required.
Requires winch mounting kit to mount the winch either on the chassis or on the front/rear receivers

Electrical harness requirements

XUV835/865	Attachment harness required (see below)
E	1

1	E-spec attachment harness
2	Front attachment harness
3	Roof attachments harness
4	Front cab harness
5	Rear cab harness
6	Dash port harness

WARN is a trademark of WARN Industries, Inc.

Winch Accessories Kit - BM21392

Winch accessories kit

Double the pulling power, change the pulling direction, and keep the winch in proper working order.

The accessories kit is essential gear for operators getting the most out of their winch:

Effectively anchors to trees/boulders
Change the pulling direction
Double the pulling capacity

The accessories kit includes:

Flexible tree strap
Snatch block
Shackle

Each kit comes in a black Cordura® heavyweight-nylon soft case.

Cordura is a trademark of INVISTA.

Wireless Winch Remote - BM26662

Wireless winch remote

Wireless winch remote mounted on XUV835

Key features

Wirelessly control winch from up to 15 m (50 ft) away
Weatherproof transmitter has two large buttons, making it easy to operate even while wearing gloves
Colored light-emitting diode (LED) lights provide clear operator feedback
Kit includes wireless transmitter, receiver, holster, wiring, and mounting hardware

Compatibility

Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
Model year 2018 to current XUV835 and XUV865 Utility Vehicles