8370RT TRACTOR

Premium lights

The 7R, 8R, and 8RT Series Tractors feature two lighting package options:

• Standard 
• Premium

The cab lighting pattern provides 330 degrees of coverage while the hood lighting provides the remaining 30 degrees for completely programmable 360-degree, stadium-style lighting. This ensures there are no dead zones or lighting adjustments needed. The lighting configurations are available to match various applications and ensure maximum around-the-clock productivity.

Bulb housings are large, allowing for optimum total lumens and available light. The standard lighting packages use 65-W halogen bulbs, whereas the premium lighting package uses light-emitting diode (LED) lights. In the premium lighting package, these tractors take advantage of the high-performing and efficient LED technology.

The low- and high-beam driving/work lights are adjustable. Please refer to the electrical section in the operator’s manual for complete details on adjusting lights.

7R/8R/8RT lighting

Yellow circles

• All lighting packages: 65-W halogen: road low beam

Red circles

• Standard: 65-W halogen
• Premium: LED

Blue circles

• Standard: 65-W halogen; field and road high beams
• Premium: LED

Orange circles

• Standard: blank
• Premium: LED

Adjustable high-beam driving light/work light License plate bracket with light Rotary beacon Fixed halogen light Adjustable low- beam driving light/work light Fixed amber light Adjustable halogen light Adjustable mid-body halogen light Fixed high-intensity discharge (HID) light Adjustable HID light Mid-body hazard, turn, and width indicating light Amber turn and brake light

Standard lighting

Standard lighting (8R)

Standard lighting (7R)

Six front grill-mounted lights:

• Two 65-W low-beam driving/work lights (mid grill screen)
• Two 65-W high-beam driving/work lights (top of grill screen, hood mounted)
• Two front corner-facing halogen work lights (top of grill screen, hood mounted)

10 cab roof-mounted lights:

• Two rear-facing 65-W floodlights
• Four side-facing 65-W floodlights
• Four corner-facing amber lights

Other lights:

• Two rear fender-mounted floodlights
• Two rear turn signal and brake/tail lights (fender mounted)
• Two folding-extremity lights

Plus these lights:

• Two adjustable front roof 65-W halogen floodlights
• Two front belt-line floodlights
• Rotary beacon light

Premium lighting

Eight front grill-mounted lights:

• Two 65-W low-beam halogen driving/work lights (mid grill screen)
• Two LED high-beam driving/work lights (top of grill screen, hood mounted)
• Two front corner-facing LED work lights (top of grill screen, hood mounted)
• Two front-facing LED working lights (top of grill screen, hood mounted, inner position on the sides)

12 cab roof-mounted lights:

• Four side-facing LED lights
• Four corner-facing amber lights
• Two rear-facing LED lights
• Two adjustable front roof LED lights

Other lights:

• Two rear fender-mounted LED lights
• Two rear turn signal and brake lights (fender mounted)
• Two folding-extremity lights
• Two front belt-line LED floodlights
• Rotary beacon light

The premium lighting package replaces all previous halogen and HID lights with LED lights. The only lights that are not LED are the low-beam driving lights, they remain halogen. This allows each LED light to work at a lower temperature and no one light works harder than any other. The uniformity in LED coverage allows only one type of light output surrounding the tractor.

The lighting pattern in the premium package provides industry-leading performance in nighttime visibility. LED bulbs provide maximum brightness and a true color output for excellent field definition that is easy on the operator's eyes.

The LED lights provide 40 percent greater coverage width and 10 percent more light coverage in the rear. LED lighting packages use 45 percent less amps than standard halogen lights and have an increased life expectancy over HID lights which leads to lower costs of ownership over the life of the tractor.

NOTE: Lighting packages may vary depending on region.

Selecting a lighting mode/programmable lighting

Lighting mode selector

Operators can quickly select a lighting mode on the steering console:

• Lights, off position  
• Road lights
• Field lights

The CommandCenter™ display

The CommandCenter display allows operators to customize light settings. Operators can select only the lights they need or want for a given application and store these settings. The operator-programmed configurations can then be turned on or off with the push of a button on the CommandARM™ controls.

• Programmable field lights 1 
• Programmable field lights 2 
• Beacon light 
• Emergency flashers

NOTE: Road/loader lights are also referred to as high-mounted driving lights for use in front hitch applications that obscure the headlights. See the Attachments section.

The battery power saver feature is also standard. When the engine is off and the outside lights have been left on, this feature is designed to avoid battery run down.
 
After the lights have been left on for 30 minutes and the key is in the off position, the lights cycle or blink on and off five times as an alert. The lights continue to illuminate for one more minute and then automatically shut off to protect the battery.

Field-installed options

Field-installed options are also available. To find this information, use the Build Your own Configurator application for US/Canada or Build & Price in John Deere Sales Centre for Australia/NZ.

Programmable exit lighting

Another feature is programmable exit lighting. Exit lighting allows the lights outside the cab to stay on for up to 300 seconds.  They can be programmed in increments from 0 to 300 seconds.

Refer to the operator’s manual for complete instructions on programming field, driving, and exit lighting.

ACS overview

8R in transport

With ACS, John Deere has designed one of the most robust and full-encompassing steering system in the industry. Whether in the field or on the road, ACS reduces steering effort, which can result in reduced operator fatigue and can improve operator comfort.

There are four key features of the ACS system:

Dynamic road wheel offset:

• A gyroscope senses tractor yaw and can automatically make small steering adjustments to provide unprecedented line-holding abilities. Drive down a bumpy road and experience how ACS makes it easier to keep the tractor straight, even over rough terrain.  ACS delivers the ultimate in comfort.
• ACS works to prevent over-steering when a sudden obstacle causes the operator to make a quick steering reaction.

Variable ratio steering:

• Approximately 3.5 turns lock-to-lock at in-field speeds for quick headland turns.
• Approximately 5 turns lock-to-lock at transport speeds.

Elimination of steering slop and hand wheel drift:

• Steering wheel drift and slop are eliminated with the ACS electronic control system.

Variable effort steering:

• Steering wheel resistance automatically changes with ground speed to deliver light steering effort at slower speeds for less effort during headland turns, and higher steering wheel torque at transport speeds for better comfort.

A fail operational system

The ACS system is fail operational, which means steering is still functional in the event of any single-point failure. John Deere has gone to great lengths to help ensure the operator has the ability to steer the tractor if something goes wrong in the steering system.
 
For example, if the primary controller fails, a second controller takes over. If power from the alternator fails, the battery resumes control. If the engine quits running and is unable to supply hydraulic oil to the system, an electric-driven backup pump is used to supply the oil. There is a backup for ACS components.

ACS components

The ACS system consists of several key components:

1. Gyroscope: this is used to measure the yaw rate (turn rate) of the tractor during transport speeds.
2. Road-wheel angle sensors: these sensors simply measure the steer angle of the tractor.
3. Power supply module: this module distributes the power of the battery and alternator throughout the ACS system.
4. Hand-wheel angle sensors and tactile feedback unit: this includes the steering wheel position sensors and a brake which can increase or decrease resistance dependent on speed. Lighter feedback is desired during normal field use, and slightly heavier feedback is desired during transport and while the tractor is cornering at high speeds.
5. Controllers: two controllers are located in the back of the tractor and are the brains of the system.
6. Control valves: also known as steering valves, control valves are used to steer the tractor.
7. Electric-drive backup pump: this pump supplies oil to the steering system, brakes, and park (for towing) brake if there is no longer a sufficient oil supply to the steering and brakes. 

Value of ACS

• Improves line holding when driving at transport speeds
• Fewer turns lock-to-lock: 3.5 turns lock-to-lock in the field for quicker headland turns and 5 turns lock-to-lock at transport speeds
• Eliminates hand wheel backlash and drift
• Reduces steering effort results in reduced operator fatigue
• Smaller hand-wheel diameter for improved operator comfort and visibility
• Maintains operator feel and touch-points of traditional steering column system
• Fully integrates with AutoTrac™ guidance assisted steering stems
• Compatible with suspended and non-suspended front axles
• Compatible with wide and narrow section width tires

The brakes are designed with large-diameter rear disc brakes and powerful activating pistons. The brakes run in oil for cooling and long life in the most demanding situations. Braking in the field during a turn can be accomplished with light pedal effort and excellent modulation of brake forces.

Hydraulically actuated, power wet-disc brakes:

• Never require adjustment
• Oil cooled for long life
• Tractors equipped with front brakes use annular pistons that automatically retract after each braking operation to reduce friction for better fuel economy
• Self-equalizing feature ensures even braking to each wheel
• Integrated backup braking capabilities built into the brake system to provide positive brake engagement should the engine or hydraulic system fail
• Brake valve is located externally of the cab to provide a quiet operating environment

An integrated park brake is included with all transmission options.

Front wet-disc brakes are included on 8R Series Tractors equipped with the 50-km/h (31-mph Independent-Link Suspension (ILS™) axle and 7R Series Tractors equipped with a 50-km/h (31-mph) Triple-Link Suspension (TLS™) Plus front axle. Front Brakes are optional equipment on the 8R 42-km/h (26-mph) ILS axle and 40-km/h (25-mph) TLS Plus front axles.

Foot brakes on tractors equipped with AutoPowr™/Infinitely Variable Transmission (IVT™) transmissions have an integrated AutoClutch™, as described in the IVT section. Similarly, foot brakes on tractors equipped with e23™ transmissions have integrated AutoClutch™, as described in the e23 section.

For towing very large loads, the 7R and 8R Series Tractors can be equipped with a complete air-brake-system or a hydraulic brake coupler, or both. The brakes supply air or oil pressure to a brake-equipped trailer or implement.

All 8R and 8RT Series Tractors come standard with an 85-cc displacement integrated hydraulic pump. This pump provides 227.1 L/min (60 gpm) of hydraulic flow.

A dual-pump option, featuring 85-cc and 35-cc displacement hydraulic pumps, is available for all 8R wheel models. The dual-pump system provides a hydraulic flow of 321 L/min (85 gpm), ideal for running at lower engine speeds.

Operating the tractor at reduced engine rpm contributes to a quieter cab, reduced fuel usage, and maintains the vacuum while turning and raising the planter on end rows. At 1500 erpm with a 321 L/min (85 gpm) system there will be an available flow of 229 L/min (61 gpm). This is an improvement over an available 162 L/min (43-gpm) flow when operating with a 227 L/min (60 gpm) system at 1500 erpm.

The maximum flow through one selective control valve (SCV) with a standard coupler is 132 L/min (35 gpm). A 19.1-mm (3/4-in.) high-flow coupler allows for a maximum flow rate out of one SCV of 153 L/min (40.5 gpm).

The hydraulic system is a closed-center, power-on-demand system using a load-sensing pressure-flow compensated axial piston pump with full-flow charge and flow prioritization for steering and brakes.

The pump outlet pressure available on demand can range from 3000 kPa (435 psi) for track models and 4000 kPa (580 psi) for wheel models at low standby to 20,400 kPa (2958 psi) at high standby.

Hydraulic pump options:

• 85-cc displacement, 227-L/min (60-gpm) hydraulic pump
  • NOTE: Standard on all 8R models.
• 85-cc and 35-cc dual pump option, 321-L/min (85-gpm)
  • NOTE: Compatible with 2014 Final Tier 4 (FT4) and newer 8R Wheel Tractors only.

CommandView III cab

The Premium CommandView III cab offers unsurpassed visibility, operator comfort, control placement, and ride and sound quality.

Features:

• ComfortCommand™ seat with air suspension and lumbar support, swivel, fore-aft and lateral attenuation, backrest angle adjustment, adjustable left-hand armrest, and 40-degree right-hand seat swivel
• Four-corner cab suspension
• Behind-the-seat storage and left-hand storage compartment
• Folding instructional seat
• Beverage holders sized to accommodate various containers
• Interior left-hand dome light
• Tilt/telescoping steering wheel with position memory
• Adjustable right-hand CommandARM™ armrest controls with integrated CommandCenter™ display
• Monitor mounts on right-hand front post and rear cab post
• Digital cornerpost display with:
  • Fuel level gauge, including low fuel warning
  • Temperature gauge
  • Diesel exhaust fluid (DEF) gauge, including low DEF warning
  • Engine rpm
  • Transmission commanded gear or speed
  • Vehicle system functions, such as iTEC™ system, that are operating
• Swing-out rear window that opens 30 degrees
• Front, rear, and right-hand windshield wiper and washer
• Two-speed and intermittent front and rear wiper
• Front, rear, and right-hand side sunshades
• Right and left outside wide-angle mirrors (electrically adjustable and heated)
• Inside-mounted rearview mirror
• Roof-mounted license plate bracket with light
• Window break
• Pin for tow point
• Passive noise reduction system
• Laminated glass
• Service ADVISOR™ data port
• Power strip with convenience plug adapter
• Two 12-V convenience outlets (cigarette lighter style)
• One 12-V 3-pin outlet with adapter (provides switched and unswitched power)
• One International Organization for Standardization (ISO) 9-pin connector
• Standard radio package, including AM/FM stereo and weatherband with remote controls, auxiliary input jack, four speakers, and an external antenna

Four-corner cab suspension

8RT Series Tractors feature the Premium CommandView III cab with cab suspension in base. Producers will enjoy all the features they have come to expect in the Premium CommandView III cab plus the addition of improved ride quality in the field and on the road with the cab suspension. The cab suspension, combined with the proven AirCushion™ suspension system, will give John Deere operators the most comfortable operating experience available in a two-track tractor.

Four-corner cab suspension system

Cab suspension components

Cab suspension components

Cab suspension components

Steering system

Steering sensitivity adjustment screen

Steering pump and loop override circuit

Steering circuit change and steering sensitivity adjustment

8RT Series Tractors include an improved steering pump, changes to the loop-override circuit, and in-cab steering sensitivity adjustment.

The improved steering pump and changes to the loop-override circuit increase steering response and steering authority on 8RT Series Tractors. Operators will notice this change when working in heavy draft, soft field conditions, and obstacle avoidance. The steering pump and loop-override circuit give the 8RT the ability to turn under load like no other two-track tractor in the industry.

8RT steering sensitivity adjusted in the 4600 CommandCenter Display

This feature allows operators to fine tune the steering system based on the application or environment.

Steering sensitivity adjustment does not only help when steering the tractor manually. Operators using guidance systems will also experience improved response with the ability to input tractor tread settings in the 4600 CommandCenter Display. From there, the tractor will control the steering pump to ensure steering is consistent no matter which tread setting the operator is utilizing.

Pull-down front, rear, and right-hand sunshade

Pull-down sunshades

These variable-length sunshades provide excellent adjustability to keep direct sun off of the operator. Perforations in sunshade material provide visibility through the sunshade as well. The sunshades are also recessed into the headliner for storage when not in use.

Right- and left-outside mirrors, electrically adjustable

Right-hand mirror shown on 8RT Series Tractor

Right and left outside wide-angle mirrors are electrically adjustable with simple in-cab adjustments to view variable-width implements, wagons, or carts. The in-cab controls are located directly above the radio.

Leather comfort option

The leather seat option is available on 8RT Series Tractors. The kit includes leather operator seat, leather instructional seat, leather-wrapped steering wheel, rear window decal, and carpet floormat.

NOTE: The leather comfort package is not available with Scraper Special Tractors.

Leather seats

Leather-wrapped steering wheel

Rear window decal

CommandARM

CommandARM controls

John Deere 8RT Series Tractors feature the CommandARM with integrated Generation 4 CommandCenter display. The control layout of the CommandARM utilizes a clean and efficient design which groups controls by function and builds upon John Deere’s history of intuitive and ergonomic control placement and operation. The CommandARM control’s design allows for a 40 degree right seat swivel and adjustable positioning matching the operator’s preference.

Controls located on the CommandARM include:

• Engine throttle
• FieldCruise™ system
• Minimum engine speed – e23™ transmission with Efficiency Manager™ feature, Infinitely Variable Transmission (IVT™)
• Eco mode
• Foot pedal lock (if equipped)
• Transmission control
• Hitch/selective control valve (SCV) controls
• Rotary encoder hitch control
• Power take-off (PTO) controls
• iTEC sequence switches
• AutoTrac™ assisted steering system resume switch (if equipped)
• Joystick (if equipped)
• Radio
• Beacon light on/off
• Hazard lights on/off
• Field lights 1/2
• Heating, ventilation, air conditioning (HVAC) system

Seat swivel

Seat swivel

The design of the CommandARM controls allows for up to 40 degrees of right-hand seat swivel.

Transmission controls

John Deere 8RT Series Tractors equipped with the e23 transmission with Efficiency Manager feature or AutoPowr™ IVT transmission feature either a left-hand or right-hand reverser.

The transmission control lever is placed on the CommandARM control’s left side closest to the operator for convenient setting and adjustment.

Left-hand IVT and PowerShift™ transmission reverser

Right-hand IVT and PowerShift transmission reverser

Throttle

Foot throttle

ComfortCommand seat

ComfortCommand seat

The ComfortCommand seat with air suspension improves ride quality and helps to reduce operator fatigue. The ComfortCommand seat with air suspension is offered with cab suspension. The ActiveSeat™ is available on fixed cab tractors.

Features include:

• Armrests, lumbar support, and backrest angle are easily adjusted to match operator preference
• Shock absorbers dampen the motion effect of the tractor for an improved ride
• Seat height adjustments are conveniently located on the left armrest
• Fore-aft adjustment is easy to reach located on the left front of the seat
• Swivel adjustment, located on the front of the seat, allows the seat to be swiveled 40 degrees to the right or eight degrees to the left of the center position
• Operator presence switch warns if the operator is out of the seat while operating key functions
• Seat belt retractor
• Centered cab seat, providing excellent over-shoulder visibility
• Adjustable shock absorber permitting ride adjustment from soft to firm to match the operator's desired comfort level
• Removable cushions for easy cleaning

Hydraulic and hitch controls

Hydraulic and hitch controls utilize fingertip paddle pots for raise/lower and extend/retract functions. An optional crossgate joystick replaces fingertip paddle pots for control of SCVs and allows for programmable hydraulic functionality according to operator preference. Rear hitch position can also be controlled with the encoder wheel located on the right side of the CommandARM. The encoder wheel allows for finite positioning of the rear 3-point hitch.

Three buttons near the encoder are for hitch set, lock, and return to height. Adjustment for the 3-point hitch is done via the CommandCenter display.

Fingertip paddle pots

Encoder wheel

Optional crossgate joystick

Throttle

The throttle design incorporates buttons which control FieldCruise speed, foot pedal mode (if equipped), and transmission eco settings.

Tractor function controls

Located just to the right of the throttle is the AutoTrac activation button and four sequence controls for iTEC functions.

AutoTrac resume and iTEC strip

Controls for radio, lights, rotary beacon (if equipped), hazard flashers, and HVAC system are located to the center-right on the CommandARM, along with PTO for both front (if equipped) and rear. 

Radio, HVAC, hazard flashers, and PTO controls

CommandCenter display

Generation 4 CommandCenter display

The Generation 4 CommandCenter displays feature fast adjustment of tractor functions and controls and are integrated into the CommandARM to create a seamless control center. The 4600 CommandCenter features a 26.4-cm (10.4-in.) touchscreen display and is standard equipment on 8RT models.

The following functions can be adjusted using the CommandCenter display:

• Hydraulic settings
• Hitch settings
• Transmission settings
• FieldCruise
• iTEC programming functions
• Radio
• Lights

PowerTech™ PSX 9.0-L engine

How exhaust gas recirculation (EGR) works

EGR reduces the high temperatures where nitrogen oxide (NOx) compounds are formed in the engine cylinders by replacing excess oxygen with a prescribed amount of cooled exhaust gas.

Exhaust gases contain more carbon dioxide than oxygen. The EGR valve in conjunction with the venturi and engine control unit (ECU) allows a controlled amount of exhaust gas to enter the intake manifold to mix with the incoming fresh air. Replacing excess oxygen with cooled exhaust gas leads to lower combustion temperatures, creating less NOx. In addition, EGR allows for advanced timing, leading to optimal performance of the engine, maximizing fuel economy.

The following diagrams illustrate how air flows through the engine.

For added performance and efficiency, the engine passes the exhaust gases through an EGR cooler before it enters the engine.

PSS engine diagram

Flow of exhaust during engine operation
 
Exhaust airflow enters into the EGR cooler from the exhaust manifold near the turbocharger.

Based on engine load, air temperatures, and rpm, the engine control unit (ECU) opens or closes the EGR valve, allowing a measured percentage of exhaust gas to enter the intake manifold.

The gases mix with the rest of the incoming air from the turbocharger and aftercooler before entering the cylinders.

Front PTO

For increased versatility, two 1000-rpm front PTO options are available from the factory for 7R and 8R Series Tractors equipped with the John Deere front hitch.

• Type 2, 1000-rpm (counterclockwise as seen from front), 35-mm (1 3/8-in.), 21-spline front PTO
• Type 3, 1000-rpm (counterclockwise as seen from front), 45-mm (1 3/4-in.), 20-spline front PTO

Front PTO features include:

• The ability to be incorporated with iTEC™ sequences
• Three choices of engagement modulation: auto, low, and high
• Integrated controls
• Cornerpost display indicators 
• Bolt-on shaft makes it easy to change shafts if necessary.
• Remote PTO engagement

7R-specific features:

• 130 kW (175 hp)
• Integrated with all transmissions
• PTO disconnect for efficiency
• Requires TLS front axle

8R-specific features:

• 112 kW (150 hp)
• Integrated with the infinitely variable transmission (IVT™)
• Requires Independent-Link Suspension (ILS™) with front brakes

Intelligent Power Management (IPM)

IPM is compatible with 7R and 8R Series Tractors equipped with a front PTO option. The front PTO, rear PTO, or transport speeds can activate IPM on 7R Tractors. However, on 8R Tractors, IPM is only activated by the rear PTO or by transport speeds. For example:

• A front snow blower will not benefit from IPM on an 8R since the front PTO alone will not activate IPM.
• A triple-mounted mower-conditioner will benefit from IPM as high power levels are transmitted via the rear PTO. The front mower-conditioner will have 150 hp available to it on an 8R, which is adequate to operate these mowers in most crop conditions.
• See Intelligent Power Management for more information

PTO disconnect on 7R Series Tractors

Disconnecting the PTO drive to the PTO box when not in use increases tractor efficiency by reducing:

• Power requirements, which saves nearly 70 percent of power required to run the PTO disengaged
• Wear on components of the PTO box; components are not moving when the PTO is disconnected

Refer to the operator’s manual for instructions on how to disconnect the PTO when not in operation.

Front PTO operation

Remote control at front of tractor

Front PTO engagement is actuated through an engagement switch similar to the rear PTO located on the CommandARM™ controls.

• PTO clutch is electronically activated with automatic torque modulation.
  • PTO modulation is selectable through the CommandCenter™ console and display.
• To activate the PTO remotely, select the remote PTO enable button in Generation 4 CommandCenter display, push down and forward on the FPTO switch in the cab and use the remote control at the front of the tractor.

NOTE: For the 8R Series, if the tractor is equipped with a front PTO, additional IPM power will transfer through the front PTO. However, IPM activation is only sensed through the rear PTO. Adequate load must be sensed on the rear PTO in order for IPM to activate.

The John Deere Waterloo Operations Gold Key Program was designed to recognize and honor those purchasing Waterloo-built tractors. The Gold Key tour provides an opportunity for a customer to follow his or her tractor as it is built on the assembly line. If a Gold Key customer is unable to visit the day the tractor is on the assembly line, the customer may elect an alternative date within 90 days to schedule a tour. This will be recognized as a Gold Key experience where the customer adopts a tractor to follow rather than watch his or her own tractor being built. After 90 days, the visit will be deemed a VIP tour and Gold Key memorabilia will not be provided.

Definition of a Gold Key tour

A Gold Key tour entails an exclusive, behind-the-scenes guided tour of the assembly production lines. The customer, or product owner, may bring up to three additional guests on the tour. Tour participants will wear Gold Key owner identification bump caps and other personal protective equipment while being escorted privately by a tour guide. Every attempt will be made to make sure the customer will see the specific tractor ordered come off the final assembly line; however, in order to satisfy delivery needs, the first priority is to keep the manufacturing lines running at full capacity.

The Gold Key visit date is based on when the customer’s tractor is expected to reach the final line. It is John Deere’s goal that a customer drives his or her tractor off the final line at the end of the tour. It is imperative to notify the John Deere dealer from whom the tractor was purchased in order to initiate a Gold Key tour. The John Deere dealer will be required to register guests on the Gold Key registration website as soon as possible if a Gold Key visit is requested. The owner will be presented with a gold key, a certificate, and other memorabilia at the conclusion of the factory visit. Breakfast and lunch will also be provided the day of the tourisit.

Process of Gold Key tour

The owner will need to notify the John Deere dealer where the Waterloo-built 6000 Series – 9000 Series Tractor was purchased. The Gold Key coordinator will be the sole contact with the dealership representative to make visit arrangements and confirmations for the visit. 

Shortly after the Gold Key coordinator confirms the request, all appropriate paperwork and information will be sent to the dealer. The customer will then receive all welcome documents in the mail. The Gold Key coordinator will also make direct contact with the customer to confirm the visit.

Ahrens Farms

Ahrens Farms of Owatonna, MN participated in the Gold Key Tour at John Deere Waterloo Works in 2015. They purchased a 9470RT Tractor.

While every attempt will be made, and the factory will do everything possible to allow a customer to see his or her tractor being built, production schedules change for many reasons. Should production change at the last minute, the owner may arrive only to find that either the tractor has been pushed back or pulled ahead and already built. While that is certainly not the intention, the possibility remains.

The factory cannot  be responsible for:

• Production delays, work ahead, or production revisions
• Any option changes at the factory level
• Overnight accommodations; however, assistance with information is available upon request
• Travel costs

Gold Key Tour guidelines

• All Gold Key tours must be initiated by the selling John Deere dealer through the Gold Key profile request form.
• The Gold Key coordinator at the Waterloo Tractor Factory will be responsible for updating the customer and dealer of the tractor build status.
• Gold Key treatment will not be recognized if any of the requirements are not met prior to arrival at the factory.
• The Gold Key Program is only available within 90 days of the tractor's build date.
• Every attempt will be made to make sure the customer will see his or her tractor come off the assembly line; however, the factory has first priority for production obligations.
• Gold Key tours are limited to the customer and three other persons, no more than four people total (excluding dealer).
• All guests attending Gold Key tours must be 13 years of age or older. Any teenage children must be accompanied and under constant supervision of a parent and/or guardian.
• No personal cameras or video cameras are allowed on the production floor during the tour. A camera from John Deere will be given to Gold Key guests for the duration of the tour.
• Tour participants must abide by all factory tour safety rules and regulations.
• Gold Key tours will be restricted if maximum tour capacity has been reached due to previously scheduled tours or special events.

The 4200 and 4600 CommandCenter, also known as the Generation 4 CommandCenter, create the primary user interface for 6R, 7R, 8R/8RT, and 9R/9RT/9RX Tractors; F4365 High-Capacity Nutrient Applicator; 4 Series Self-Propelled Sprayers; and S700 Combines. The Generation 4 CommandCenter provides an excellent, user-savvy, efficient operating experience.

Display options

Generation 4 CommandCenter is available in the following configurations:

• 21.3-cm (8.4-in.) display on the 4200 CommandCenter
• 25.4-cm (10-in.) display on the 4600 CommandCenter

For growers wanting to maximize their viewing real estate, the 25.4-cm (10-in.) touchscreen color display is an excellent choice. With the 25.4-cm (10-in.) display, the title bar and all shortcut keys may be viewed at all times, allowing operators to monitor more information at once.

John Deere 4200 CommandCenter

A. Next run page
B. Status center
C. Expand shortcut keys
D. Menu
E. Run page

John Deere 4600 CommandCenter

A. Next and previous run page
B. Status center
C. Shortcut keys
D. Menu
E. Run page
F. Title bar

John Deere Generation 4 CommandCenter Processors

A Generation 4 CommandCenter is made up of a processor and a display. Two processor options are available for the Generation 4 CommandCenter.

4200 CommandCenter 21.3-cm (8.4-in.) display

The 4200 Processor is base equipment and only offered on 6R, 7210R, and 7230R Tractors.

It offers:

• Compatibility with 21.3-cm (8.4-in.) touchscreen display
• One video camera input
• One USB input
• AutoTrac, Data Sync, and Section Control capable (machine-specific activation sold separately)

CommandCenter compatibility

The table below shows the model year of machines equipped with CommandCenter. Upgrade kits are available for 4100 to 4600 for machines that came equipped with a 4100 CommandCenter from the factory. There are no upgrade kits for converting a 4200 to 4600 at this time.

4200 CommandCenter is available starting with model year 2019 6R, 7210R, and 7230R Tractors.

Expect easier set-up, along with increased operator confidence, thanks to a simple, customizable interface. The improved design of the Generation 4 CommandCenter also aids in an optimal operating experience and maximizes uptime.

Some of the easy-to-use benefits of the Generation 4 CommandCenter include:

• Custom-defined views
• Intelligent warnings
• Context-based help
• Ability to import, export, and delete files

Producers can use a variety of implements with the Generation 4 CommandCenter as it is Agricultural Industry Electronics Foundation (AEF) ISOBUS compliant for manual control of IOSBUS implements (UT) as well as automatic section control (TC-SC) and documentation in ISOXML format (TC-Basic).

Help icon

Help center main page

Additionally, application-based help is also available in all locations of the CommandCenter. Simply click on the {i} icon available on the title bar and it will lead directly to more information on the application currently being used.

Context-based help icon

Context-based help on iTEC™ system main page

Diagnostic text and information is available for better understanding of whether applications are operating as directed.

Machine monitor

Machine monitor page

The machine monitor application provides the operator instantaneous readings about the status or condition of the machine. Values shown in the machine monitor vary by application, but typically include parameters like engine speed, coolant temperature, and ground speed. The machine monitor supports run page modules in the Layout Manager, allowing the operator to populate specific machine parameters directly to a run page.

NOTE: The machine monitor application replaces part of the universal performance monitor in previous machines.

Work setup shortcut key (far left)

Work setup

Video capability

Tractors with a 4200 CommandCenter are equipped with one video input, and the 4600 CommandCenter Display has four video inputs. The operator has the ability to set a variety of triggers, including reverse, PTO, hitch, and selective control valve (SCV) levers to activate the camera. Once triggered, the image will then appear on the CommandCenter display. The camera (video observation system) is available through JD Parts and Ag and Industrial (A and I) Products.

Video looping supported with Gen 4 4600 CommandCenter Display and 4640 Universal Display

This feature enables users to scan or loop through all of the available video feeds for a specified duration. The default scan time is set to 7 seconds per image. The scan time is customizable between 1 and 300 seconds per image before continuing the loop, providing constant visibility to all video feeds.

Help icon

4600 CommandCenter 25.4-cm (10-in.) Display

The 4600 Processor is the premium processor, offered as an option on all 6R*, 7210R, and 7230R Tractors and is standard on 7250R, 7270R, 7290R, 7310R, 8R/8RT, 9R/9RT/9RX Tractors, F4365 Nutrient Applicator, 4 Series Self-Propelled Sprayers, and S700 Combines.

Available features with the premium processor include:

• Compatible with 25.4-cm (10-in.) touchscreen display Four video camera inputs Four USB inputs
• Wireless Data Transfer
• AutoTrac™ guidance capable (machine-specific activation sold separately)
• Machine specific activations including CommandCenter Premium and CommandCenter Automation enable Section Control, Data Sync, RowSense, In-Field Data Sharing, AutoTrac Implement Guidance, AutoTrac Turn Automation, Machine Sync and John Deere Wireless Data Transfer (WDT) (with a JDLink™ Connect subscription)
• Export screenshots and troubleshooting information easily from the display

*Only compatible with Infinitely Variable Transmission (IVT™) and DirectDrive™ transmission

Layout manager

Layout manager selection page

Layout manager module build

The Generation 4 CommandCenter features a modular-designed layout manager, so operators can easily create the page views that meet their needs. From the factory, machines are equipped with default run pages. An unlimited number of run pages can be added to the Generation 4 CommandCenter based on operator preference or operational needs. Toggling between run pages is as easy as swiping the screen or using the arrow buttons on the top right portion of the title bar.

Users and access

Users and access allow the owner or manager to lock out certain functions to prevent operators from accessing or changing settings. Lock-out functions are managed with a defined four-digit code.

Lock-out features are available for:

• Factory data reset

• Hitch

• Hydraulic

• Transmission

• Power take-off (PTO)

• FieldCruise™ system

• Display

• Machine monitor

On-screen help and diagnostic text

There are a number of different ways to get meaningful on-screen help when navigating the Generation 4 CommandCenter. Operators can find the help icon on the shortcut bar on the bottom of every page. This icon gives detailed information on everything from tractor operation to application information. Simply select the help icon and navigate to the information section that is needed.

Work monitor

Work monitor page

The work monitor application displays performance information about the task being performed by the machine. The operator is shown averages, totals, and productivity of the machine, such as area worked, average working speed, and fuel usage. The values of the work monitor can be reset by the operator at any time. Specific values of the work monitor can be configured by the operator to be shown on a run page.

NOTE: The work monitor application replaces part of the Universal Performance Monitor in previous machines.

Work setup application

Work setup places the settings needed to properly setup AutoTrac, Documentation, and Section Control in a single location.

Settings include:

• Client, farm, and field
• Crop type
• Machine and implement dimensions
• Variety/hybrid and planting/ seeding rates
• Variable rate prescriptions
• Product and application rates
• Application rates through the implement screens

Work setup can be quickly accessed from a shortcut key or the display menu, allowing operators and managers to quickly review display and machine settings to ensure a job is completed properly.

NOTE: 6R Tractors equipped with a 4600 CommandCenter Display have two video inputs.

Dual-display mode

Dual display

Generation 4 CommandCenter display and GreenStar displays comparison and compatibility

The Generation 4 CommandCenter works in dual-display mode with GreenStar 3 2630 Display, GreenStar 2 1800 Display, and GreenStar 2 2600 Display.

Generation 4 CommandCenter may be configured to run with the following John Deere displays connected at the cornerpost of a John Deere tractor:

• GreenStar 2 1800 Display
• GreenStar 2 2600 Display
• GreenStar 3 2630 Display
• 4640 Universal Display
• 4240 Universal Display

Vehicle applications will always be located on the Gen 4 CommandCenter.

View on-screen help to properly set up the display when in dual-display mode by clicking on the icon (pictured below).

Flags

Create flags to mark items in the field

Mark areas of the field that need special attention or items that need to be addressed such as rocks, tile lines, or weed pressure. Flags previously recorded on the Gen 4 or GreenStar™ 3 2630 Display can be transferred between displays to ensure each operator is aware of upcoming field obstacles. 

Document field boundaries

Manually drive field boundaries with the Generation 4 CommandCenter or import existing boundary information from the GreenStar 3 2630 Display or John Deere Operations Center. Gen 4 documentation data can be used to create boundaries from coverage within the John Deere Operations Center.

The display uses a streamlined boundary creation process that generates exterior and interior field boundaries from coverage, simplifying the process and reducing steps. Operators can delete interior boundaries without impacting the exterior boundary or headlands. In addition, operators can choose to turn boundaries off for section control while using them for field locator and documentation.

Headland boundaries can also quickly be generated by simply entering a distance or the number of passes from an exterior boundary.

Boundary creation from coverage

Headland creation

Boundaries can be imported from the following sources:

• John Deere Operations Center
• Directly from a GreenStar 3 2630 Display or another Gen 4 Display
• APEX™ software or another farm management information system (FMIS) system that exports in GreenStar 3 2630 Display format

Automatic base station switching

Setup base stations in Fields & Boundaries applications

Customers using John Deere RTK Radio 450 or 900 can link a base station to a desired client/farm/field. This allows automatic switching to the associated base station when changing fields. The ability to import base station assignments into Operations Center and send back to machines will be available at a later date.