×
Quick Equipment Search
Equipment Fliter










used search tag used search tag

S120 LAWN TRACTOR

Lawn Tractor

  • 22 hp (16.4 kW)* V-Twin Engine
  • 42-in. Edge™ Mower Deck
  • Hydrostatic Transmission w/side-by-side pedals
  • Easy Change™ 30-Second Oil Change System
  • 15-in Open-Back seat
  • Easy to read fuel gauge with low light visibility
  • 2 year/120 hour bumper-to-bumper warranty



View Product Brochure



Features



22-hp (16.4-kW) engine (shown on U.S. model) 22-hp (16.4-kW) engine (shown on U.S. model)

A 22-hp (16.4-kW) V-twin engine has plenty of power and torque to handle tough mowing, mulching, and bagging:

  • V-twin cylinder design for greater torque, lower vibration, and improved sound quality
  • Electronic ignition for fast starts
  • Spring-return feature to ensure the operator does not mistakenly leave the throttle lever in the choke position
  • Cast-iron cylinder liners for longer engine life
  • Overhead valves for excellent power and fuel economy
  • Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
    • More effective when operating the tractor on an incline
Fuel tank
Convenient fuel filler opening Convenient fuel filler opening
  • The capacity is 2.4 U.S. gal. (9.1 L).
  • The fuel filler opening is conveniently located under the seat. 
    • Filling the tank without spilling is easy.
    • A tethered fuel tank cap is more convenient.
    • The sealed fuel cap helps keep vapors inside the tank.
John Deere Easy Change 30-second oil change system John Deere Easy Change 30-second oil change system

The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as twisting on a new oil-filled filter. Oil does not need to be drained from the engine.

The John Deere Easy Change filter is an additional engine oil reservoir. Changing the filter removes the captured contaminants and replaces about 0.8 qt (0.76 L) of engine oil.

The functionality does not stop with ease of use. The Easy Change oil system has several meaningful benefits over the traditional oil filter system of the 100 Series:

  • A synthetic filter material is used for more predictable filtering and longer life.
  • Filtering capacity is greater than with a standard oil filter.
    • More filter surface area
    • More oil flow capacity
  • The system has 40 percent more oil volume.
  • The oil and engine run cooler.
  • The oil filter valve closes whenever the engine stops, so filtered particles are captured and cannot drain back into the engine.
  • The risk of spilling during oil service is greatly reduced.
  • Waste oil (and new oil production) is reduced by over 1,000,000 lb (453,592.4 kg) per tractor production year.
  • This system is not a compromise to just make oil changes easier—these engines pass the same John Deere expectations and rigorous testing as always.

Partly due to these improvements, it is not necessary to remove and dispose of all the oil in the engine during service.

Everyone who uses the John Deere Easy Change system saves time and avoids the mess of a traditional oil change. In the past, many 100 Series Lawn Tractor owners rarely or never got around to changing their engine oil. With  the 30-second oil change, even people who previously would not consider changing the oil themselves can easily do it. The Easy Change system is a no-mess, no-fuss solution the competition cannot match.

Installation instructions are in the Operator’s Manual and in the John Deere Easy Change service part box.

Please recycle. Many local government recycling programs, authorized retailers, auto-service centers, and auto-parts stores will puncture and recycle used oil filters and oil.

Solid one-piece frame Solid one-piece frame
Solid one-piece frame Solid one-piece frame

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

  • Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.
  • One-piece, steel fender deck is bolted to the frame.
Cast-iron front axle will not bend
Front axle and wheel spindle Front axle and wheel spindle

The front axle is constructed of solid cast iron that will not bend:

  • Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
  • Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
  • Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.
Front bumper protects the tractor
Front bumper Front bumper
Front bumper Front bumper

The front bumper is included on the S130, S140, S160, S170, and S180. It is available as an optional attachment for the S100, S110, and S120.

  • Additional front-end protection
  • Attractive, bold style
CargO Mount™ system makes installation of rear bagger and other attachments easy
Rear CargO Mount points Rear CargO Mount points
Front CargO Mount points at the top of the dashboard Front CargO Mount points at the top of the dashboard
Rear bagger is mounted with CargO Mount points Rear bagger is mounted with CargO Mount points
Rear bagger is mounted with CargO Mount points Rear bagger is mounted with CargO Mount points

The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.

Snow blower, weather enclosure, weights, and chains on a 100 Series Tractor Snow blower, weather enclosure, weights, and chains on a 100 Series Tractor
Front blade, weather enclosure, and chains on a 100 Series Tractor Front blade, weather enclosure, and chains on a 100 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

  • 44-in. (112-cm) Snow Blower
  • 46-in. (117-cm) Front Blade
  • Tire chains or TerraGrip traction belts
  • Weather enclosure
  • Weights

 

Two-pedal speed/direction controls Two-pedal speed/direction controls
Forward speed control pedal in use Forward speed control pedal in use

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:

  • Automotive-type accelerator controls ensure easy operation.
  • Operator can change direction without lifting foot off the platform.
  • Large pedal surface gives superior operator comfort.
Hydrostatic transmission Hydrostatic transmission

Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

  • Tuff Torq TLT200 – S100, S110, S120, S130, S140, and S160
  • Tuff Torq K46 - S170 and S180
Comfortable operator station, S130 shown Comfortable operator station, S130 shown
Comfortable operator station, S130 shown Comfortable operator station, S130 shown

The operator station is designed for operator comfort and easy operation:

  • Controls are positioned where they are easy to reach and use to control the tractor.
  • The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
  • The seat is positioned to provide the most comfortable operator position.
Steering wheel and dash, S130 shown Steering wheel and dash, S130 shown
Wide footrest with debris-removal channels Wide footrest with debris-removal channels

Controls are easy to see and use:

  • Large, three-spoke steering wheel for greater operator comfort and control
  • Ignition switch is on the dash for starting ease

Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:

  • The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
  • Debris-removing channels help keep the footrest area clean and dry.
Comfortable seat Comfortable seat
Easily adjusted seat Easily adjusted seat

Operator comfort is enhanced with a 15-in. (38-cm) high-back, two-piece seat with an open back:

  • The open-back seat design keeps the operator cooler
  • Especially helpful when operating the tractor for extended periods of time
  • Easily adjusted forward or rearward while in the seat
  • Seat travel of 5.5 in. (14 cm) and 10 different positions to adjust for operator height
Seat springs give a smoother ride Seat springs give a smoother ride
Seat tilted forward Seat tilted forward

Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.

The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.

Storage compartment Storage compartment
Beverage holder (shown with optional storage compartment cover) Beverage holder (shown with optional storage compartment cover)

Storage compartment and beverage holder, located on the right-side fender, are conveniently located and easy to use.

NOTE: A storage compartment cover is standard on S120, S130, S160, S170, and S180 Tractors and optional on the S100, S110, and S140.

Fender flares Fender flares

Fender flares included on the S130 Tractor cover the tires more completely and add style to the tractor.

S120 Tractor S120 Tractor
Steering wheel and controls on S120 Steering wheel and controls on S120
Instruments and controls

The contoured dash has clean, attractive styling:

  • Controls are color-coded and labeled for easy identification.
  • Controls are logically placed and easy to reach.
  • The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
  • Functional design of the controls provides good appearance and a comfortable feel.
Easy-read fuel gauge shows fuel level on the dashboard
Easy-read fuel gauge Easy-read fuel gauge
Convenient fuel filler opening Convenient fuel filler opening

The easy-read fuel gauge shows how much fuel is in the tank and can be seen on the dashboard:

  • Easy to check fuel level
  • Convenient location
  • Visible in cloudy or dusk conditions (is not backlit)
  • Does not slosh from bumps
  • The MowerPlus™ smartphone app can read and remember the fuel level (optional MowerPlus deluxe smart connector required)
  • The hour meter is also visible on the fuel gauge display
Side-by-side transmission control pedals
Two-pedal speed/direction controls Two-pedal speed/direction controls
Side-by-side foot pedals Side-by-side foot pedals

Side-by-side foot pedals control the speed and direction of travel:

  • Automotive-type accelerator controls ensure easy operation.
  • Operator can change direction without lifting foot off the platform.
  • Large pedal surface gives superior operator comfort.
Cruise control (S120, S130, S160, S170, and S180)
Cruise control lever Cruise control lever

Cruise control is available on the S120, S130, S160, S170, and the S180:

  • To engage, lift the cruise lever and hold until the foot is removed from the forward pedal.
  • The cruise control can be released by pushing on the brake pedal or the forward pedal.
Mower deck height adjustment
Mower deck height adjustment lever Mower deck height adjustment lever

A spring-assisted, ergonomically designed lift lever simplifies adjusting the mower cut height:

  • Increments of 1/4  in. (0.64 cm) allow fine-tuning the cut height.
  • Cut height is adjustable from 1 to 4 in. (2.5 to 10.2 cm).
  • The lift handle is shaped for easy use and is out of the way of entering or exiting operators.
Parking brake control
Brake/parking brake pedal Brake/parking brake pedal
Parking brake lever Parking brake lever

The parking brake control is conveniently located on the tractor pedestal for easy access. It holds the brake pedal securely in the locked position.

Manual power take-off (PTO)
PTO engagement lever PTO engagement lever

The mower deck is engaged with the easy-to-see and easy-to-use yellow lever above the dashboard. Its placement on the right side leaves a lot of room on the left, the entry side of the tractor, for the operator to get on and off the tractor.

Reverse implement option (RIO)
RIO switch RIO switch
Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

  • Carefully check the area around the machine.
  • Disengage the mower before backing up.

 

NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

 

  1. Stop forward travel.
  2. Look behind the machine to be sure there are no bystanders.
  3. Push and hold in the RIO switch while depressing the reverse pedal slightly.

 

NOTE: If the engine and mower or other attachment stops while repositioning the machine, return the attachment engagement lever/switch to the off position. Start the engine and engage mower or other attachment. Begin again with step 2.

 

  1. Release the RIO switch and reposition the machine as the machine begins to move rearward.
  2. Resume forward travel. The mower or other attachment should continue operating.
  3. Repeat procedure to position the machine again.
One-piece hood is easy to open One-piece hood is easy to open
Service interval decal located under hood Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

  • Important service points are located within easy reach.
  • A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.
John Deere Easy Change™ 30-second oil change system John Deere Easy Change™ 30-second oil change system
Seat tilted up for easy access to fuel-fill opening Seat tilted up for easy access to fuel-fill opening

The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as removing the old oil-filled filter and twisting on a new oil-filled filter.

The seat tilts up and out of the way to make adding fuel easy.

Hood will not rust or dent and includes quality headlights
One-piece hood opens for service access One-piece hood opens for service access
Quality headlights for good visibility Quality headlights for good visibility
  • Molded-in color material reduces sound and will not rust or dent.
  • Same quality hood material as on larger John Deere tractors provides good resilience and UV resistance for an extended time.
  • Openings on the side let in plenty of cooling air while keeping the sound level low.
  • Two headlights provide good lighting for nighttime operation.
MowerPlus app screen MowerPlus app screen
MowerPlus app maintenance screen MowerPlus app maintenance screen

Keep a John Deere lawn tractor running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.

Look for the MowerPlus app on the iOS® or Android™ system app stores.

The app supports residential lawn equipment such as 100 Series, 200 Series, X300, X500, X700, Z200 through Z600, and many similarly sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.

NOTE: Some product image variation may exist.

 

MowerPlus connectors also available (sold separately)
MowerPlus hour meter connector MowerPlus hour meter connector
MowerPlus deluxe smart connector, with a phone MowerPlus deluxe smart connector, with a phone

The John Deere MowerPlus connectors wirelessly link a lawn tractor to the MowerPlus app on a mobile device.

  Deluxe smart connector Hour meter connector
Compatible with lawn tractors

S120, S130, S160, S170, and S180
Model year 2021 and later S240 (SN 880,001- )

S100, S110, S140, S220
Communicates engine usage to track maintenance intervals X X
Communicates fuel level and battery health X  
Compatible with MowerPlus app for iOS® operating system X X
Compatible with MowerPlus app for Android™ operating system X  

iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.

42-in. (107-cm) Mower Deck 42-in. (107-cm) Mower Deck
42-in. (107-cm) Mower Deck 42-in. (107-cm) Mower Deck

The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give superior mowing performance, convenience, and reliability:

  • The deep-deck design lifts grass for a clean, even cut.
  • The smooth underside has no nooks and crannies, preventing grass buildup and evenly dispersing grass clippings.
  • The rolled outer edge of the deck provides extra strength and protection.
  • Dual-stage E-coat and powder paint coatings provide extra protection from rust.
  • Flexible discharge chute minimizes property and mower deck damage.

The 42-in. (107-cm) Edge Mower Deck is a two-spindle design with heavy-duty characteristics:

  • The 13-gauge, 0.090-in. (2.3-mm) steel deck provides years of dependable mowing.
  • Included three-in-one blades work well for side-discharge, mulching, or bagging.
  • The blade-to-spindle design provides a unique mounting system for the mower blade that provides extra safety and convenience.
  • No tools are required to switch from mulching to side discharge to rear bagging.
  • mulching cover is an optional attachment that can be installed without tools to allow mulching with the standard mower blades.
  • High-performance mulching blades are available to enhance mulching performance.
  • high-performance mulching attachment  is an optional attachment that includes a mulch plug and special mulching blades for excellent performance.
Mower wash port
Mower wash port Mower wash port
Mower wash port with hose connector Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy:

  • A hose connector is included with mower deck.
Optional bagger
6.5-bu (229-L) hopper and chute on an S100 6.5-bu (229-L) hopper and chute on an S100

cut-and-throw, 6.5-bu (229-L) bagger is sold separately and comes with bagging blades. Special bagging blades are not required but they can enhance performance.

The bagger kit provides an efficient means of collecting grass clippings and leaves. It can be set up without tools in minutes and has easy-to-empty bags.

StarLock™ blade design
StarLock blade design StarLock blade design

The StarLock blade design keeps the blade bolt at the correct torque for easy removal.

Optional blades for difficult mulching or bagging conditions are available.

An exclusive 2-year or 120-hour single-source, bumper-to-bumper warranty* is included for all John Deere 100 Series Tractors.

  • The warranty is hassle free, with John Deere handling the service and paperwork.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Specifications


Compare the specifications of up to 4 models

Key Specs s120-lawn-tractor
Current Model
Engine power22 hp
16.4 kW
Oil changeJohn Deere Easy Change™ 30-second oil change system
Engine manufacturer/model44N677 (M44)
Transaxle typeTLT200 hydrostatic, two-wheel drive
Transaxle controlSide-by-side pedals
Rear tires20x8-8
Lift system typeSpring-assisted hand-grip lever
Cutting widthEdge™ mower deck, 42 in.
107 cm
U.S. warranty2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Engine
Power22 hp
16.4 kW
Displacement44.2 cu in.
724 cm
Manufacturer/model44N677 (M44)
TypeOverhead valve, full-pressure lube, oil filter
CylindersV-twin
GovernorMechanical
Choke/speed controlSingle lever with spring-return on choke
Cooling methodAir
Air cleanerCartridge
Oil changeJohn Deere Easy Change 30-second oil change system
Fuel system
TypeGasoline
Fuel deliveryPulse pump and carburetor
Fuel gaugeEasy-read on dash
Fuel tank locationRear
Fuel fill openingCenter, 1.75 in.
4.45 cm
Fuel tank capacity2.4 U.S. gal.
9.1 L
Electrical system
Battery12 V
300 CCA
Charging systemRegulated, 8 amp
Engine starterBendix type
HourmeterYes
HeadlightsTwo standard, incandescent
Taillights or reflectorNo
Backup lightsNo
Rear work lightsNo
12-V outletNo
Transaxle
TypeHydrostatic, 2-wheel drive
ControlSide-by-side pedals
Cruise controlStandard
Oil coolerFins and fan on transaxle
Oil filterYes, not serviceable
Differential lockNo
Forward speed0-5.5 mph
0-8.9 km/h
Reverse speed0-3.2 mph
0-5.2 km/h
BrakesInternal wet disk
Chassis
FrameFull-length welded steel
Primer/paintE-coat/powder
Weight bracketOptional rear
Receiver hitchNo
Front axleCast-iron front axle, powdered-metal front wheel bushings
Spindle bushingsNo
Front tires15x6-6
Rear tires20x8-8
Hood materialMolded-in color material reduces sound, will not rust or dent
Fender deck materialStamped steel
Floor matsYes, with debris removing channels
StorageStorage tray with cover
Service interval decalYes
Fender handles/gripsNo
Cup holderYes
Equipment mountingCargO Mount™ system
Steering
TypeSector and pinion with single drag link and tie rod
Four-wheel steerNot available on this model
Steering wheelStandard, diameter - 12 in.
30.5 cm
Tilt steering wheelNo
Turning radius18 in.
45.7 cm
Uncut circle radius25 in.
63.5 cm
Seat
TypeTwo piece with open-back
Seat back height15 in.
38 cm
ArmrestsNo
Fore-aft adjustmentWhile seated, 5.5 in.
14 cm
Seat suspensionTilt, two coil springs
Lift system
TypeSpring-assisted hand-grip lever
Hydraulic outletsNo
Mower cut height13 positions, 1-4 in.
2.5-10.2 cm
Cut height increments0.25 in.
0.64 cm
Preset cut heightNo
Mower deck
TypeSide discharge
Cutting widthEdge™ mower deck, 42 in.
107 cm
ConstructionStamped steel deck shell
Mower deck materialSteel, 13 gauge
0.09 in.
2.3 mm
Mower wash portYes
Mower drive systemManual power take-off (PTO)
Mower wheelsTwo
Mower wheel adjustmentOne bolt
Mower level adjustmentEasy-level deck
Mower attachability
TypeSlide under tractor
Front draft armsOne spring clip
Rear draft armsTwo spring clips
Mower wheels rotateNo
Drive systemSingle belt
Safety
Meets ANSI standardYes
Meets OPEI standardYes
Backup protectionReverse Implement Option (RIO)
Safety videoYes
Buyer's notes
NotesMolded-in color material reduces sound, will not rust or dent
Durable primer and powder paint finish
Full-length welded steel frame
John Deere Easy Change 30-second oil change system
Warranty2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional equipment
Mowers
Rear bagger2-bag, 6.5 bu
229 L
Powered material collection
Mulching systemMulch cover or high-performance plug
Front thatcher
Front blade46 in.
116.8 cm
Mid-mount blade
Snow blowerTwo-stage, 44 in.
111.8 cm
Rotary broom
Rotary tiller
Sleeve hitch
3-point hitch
Rear power take-off (PTO)
Plow, moldboard
Box scraper
Cultivator
Rear blade
Disk harrow
Landscape rake
SprayerTow-behind, 15 U.S. gal.
56.8 L
Mounted, 15 U.S. gal.
Tow-behind only, 25 U.S. gal.
94.6 L
SpreaderTow-behind only, 125-175 lb
57.7-80 kg
Front bumperStyled front bumper
Brush guard
Weather protectionWeather enclosure
Sun canopySun canopy
Rear receiver hitch
Bucket holderYes, single bucket
Grass stripingLawn striping kit
Tractor shovel
Front loader
Other equipment
Tow-behind tools16
Dimensions
Height44 in.
112 cm
Overall length69.7 in.
177 cm
Wheelbase48.9 in.
124.2 cm
Width with mower55.2 in.
140.2 cm
Width with mower (deflector raised for storage)46.5 in.
118.1 cm
Width without mower
WeightMower, no fuel, 444 lb
201 kg

© 2024 Valley Plains Equipment LLC - Powered ByEQHarvest logo